Fluke Norma Star Point Instructions

Norma Star Point Adapter

Introduction

The Norma Star Point Adapter (the Product) generates a virtual star point in

3-phase delta systems without neutral for measuring purposes and provides:

• Maximum 500 V Phase-to-Phase

• High frequency range 100 kHz

• Compensated phase angle

• Basic uncertainty ±0.2 %

• Insulation 600 V CAT III

• Safety input plugs

• Insulated safety output connectors

PN 4408358 September 2007, Rev. 2, 12/16

Specifications are subject to change without notification.

All product names are trademarks of their respective companies.

Table of Contents

Do you have a question about the Norma Star Point and is the answer not in the manual?

Page 1 Norma Star Point Adapter Instructions Introduction The Norma Star Point Adapter (the Product) generates a virtual star point in 3-phase delta systems without neutral for measuring purposes and provides: • Maximum 500 V Phase-to-Phase • High frequency range 100 kHz •...
Page 2 How to contact Fluke To contact Fluke, call one of the following telephone numbers: • Technical Support USA: 1-800-44-FLUKE (1-800-443-5853) • Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853) • Canada: 1-800-36-FLUKE (1-800-363-5853) • Europe: +31 402-675-200 • Japan: +81-3-6714-3114 • Singapore: +65-6799-5566 • Anywhere in the world: +1-425-446-5500 Or, visit Fluke's website at www.fluke.com.
Page 3 • careful operation and maintenance Maintenance With correct use, the Product does not require special maintenance. Repair should only be done at a Fluke Service Center by trained and qualified personnel within the guarantee period. See www.fluke.com for locations and contact information of Fluke Service Centers worldwide.
Page 4 ≤10 °C non-condensing LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.