Release Monitor Counterbalance - idi MDS Installation & Operator's Manual

Installation & Operator Manual for MDS
6.2.

Release Monitor Counterbalance

Tools: 3/16" Hex Key.
Procedure:
6.2.1. Once both main Monitors are mounted and secure, the counterweight Locking
Collars are ready to be relocated from their storage positions.
6.2.2. With a 3/16" Hex Key, loosen the lower Locking Collars and lower them to the
bottom of the slide rail. Loosen and raise the upper Locking Collars to the top
of each slide rail and retighten as shown below.
NOTE: Arms will not move vertically until Vertical Travel Lock Hooks are disengaged.
L280-0960 Rev. C
www.imagediagnostics.com 9