Operating The Air Tyre Inflator; Storage; Disposal - Parkside PDLS 5 A1 Translation Of The Original Instructions

Operating the air tyre inflator
♦ Keep the valve stopper
push the pinch valve
tyre you wish to inflate. Release the valve stop-
per .
♦ To inflate the tyre, press the trigger on the air
tyre inflator .
♦ Release the trigger on the air tyre inflator
check the tyre pressure on the pressure gauge
.
♦ Press the trigger
high. This releases air from the tyre.
NOTE
► The pressure gauge
should therefore recheck the tyre pressure us-
ing a calibrated appliance at a petrol station
or car workshop as soon as possible.

Storage

♦ Store compressed-air appliances only in dry
rooms.

Disposal

The packaging consists of environmentally
friendly material. It can be disposed of at
any local recycling container.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
Environmental compatibility and material
disposal:
■ Paints and lacquers... are considered special
waste which must be disposed of accordingly.
■ Observe the local regulations.
■ Observe the manufacturer's instructions.
■ Environmentally harmful chemicals must not be
allowed to get into the ground, groundwater or
any body of water.
■ Spraying work next to bodies of water or ad-
joining surfaces thereof (catchment basin) is
therefore not permitted.
■ When buying paints, lacquers... pay attention
to their environmental compatibility.
PDLS 5 A1
pressed down and
onto the valve on the
if the tyre pressure is too
is not calibrated. You
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary.
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
to
20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product.
GB │ IE │
21 ■