RANS S-19 VENTERRA
The following is a list of tools that will be helpful when assembling your RANS S-19.
HAND TOOLS
Pliers
Needle Nose Pliers
Needle-Nose Vise Grip Pliers
Wire Strippers
Aviation Snips
Hammer
Rubber Mallet*
Several Small Clamps
Wrench Set SAE & Metric
Ruler & Tape Measure
Adjustable Fly Cutter*
Set of Drill Bits (sizes listed below)
Deburring Tool
Cleco pliers
Fluting Pliers
POWER TOOLS
Electric Hand Drill
Dremel*
Soldering Iron
CD or MP3 Player*
It is highly recommended that you use a pneumatic riveter.
These are the pneumatic riveters that we use at RANS.
Marson V2 lightweight pneumatic riveter
MSC Industrial Supply Co.
LUBRICANTS, ADHESIVES & TAPES
Small Can Lithium Grease
Contact Cement
Super Glue
Drill Lubricant (We use Walter Cool-Cut) *
Double Stick Tape
PVC Cleaner and Cement
AIRCRAFT TOOL LIST
P/N 04053278
Text manual
Safety Wire Pliers
Vise Grip Pliers
Side Cutters
Small spring clamps
Hand Pop-Rivet Tool
Click Punch
Screwdriver Set
Safety Glasses
Socket Set - SAE & Metric
2 or 4 ft. Level
Utility Knife
Files
Scotch-Brite Pads
Digital Protractor*
Flanging (Edge Rolling) Tool
Small Electric Grinder
Bench Disk Sander*
Heat Gun*
Right Angle Drill and Bits
P/N 79014
Clear Silicone
WD40
Lubricating oil
Glue Stick
™
3M
Brand #471 Vinyl Tape
DOW 730 Sealant or similar
00-7
04/01/2011