6.3 Security
You can set the monitor to be accessed only via a password.
. 1
.
Press
to open the Setup screen.
.
. 2
.
Select Security. Selecting Security will always display the following
.
password prompt. Enter the current password. The initial password is
0000. This is working only from 1004.17.
. 3
.
Set Functions Lock to On.
.
. 4
.
Because the initial password of most devices with a security function is
.
set to 0000, it is best to change the password. Enter a new password in
the Change PIN field.
. 5
.
If you forget your password, perform Reset Settings. The password
.
will be reset to 0000. Refer to the following section for details about
Reset Settings.
◀
▶
52
6.3 Security