resolution, max frame rate will be used.
. 4
.
A higher sharpness will compromise simultaneity. For instance, a pic-
.
ture of you waving a hand will appear delayed for a remote caller. For
simultaneity, set Video Mode to Motion.
. 5
.
A bad network connection sometimes corrupts the picture, which ap-
.
pears as a mosaic, during a call. Set SVC to On. Clear and normal
picture will be restored. SVC will be take effect while remote system is
capable to support it; for example, RADVISION VC240 and Elite MCU.
. 6
.
A bad network connection also causes freeze picture during a call. Set
.
PLC to On. Video will not freeze in case of severe loss on network.
PLC will be used in case SVC is not active or not supported by remote
system.
◀
▶
22
3.3 Call Settings