Installing The Stand - Samsung SyncMaster VC240 Quick Start Manual

1-2

Installing the Stand

Before attaching the stand, place a soft cloth on a flat, stable surface, and then place the product onto the cloth so that the
screen is facing downwards.
Caution: When placing the product on a flat surface, you can damage the projection on the camera. To prevent damage,
place the monitor down gently and carefully.
Place a soft cloth over a flat, sturdy table, and then place the product onto the cloth so
that the screen is facing downwards.
Turn the stand in the direction indicated by the arrow.
Do not remove the stopper pin before installing the base.
Make sure that the stand has been properly turned in the right direction.
Push the base into the product's stand in the direction indicated by the arrow.
Do not remove the stopper pin before completely installing the stand's base.
Otherwise it may cause physical injury.