Table of Contents
Advertisement
Installing the stand on a table
Table requirements for installing the stand are shown below by table type.
≤90 mm
≤40 mm
•
Table with no raised edge
•
The stand can be used through adjustment
depending on the table thickness. (≤90 mm)
30 ~ 65 mm
55 ~ 90 mm
•
Table with a spaced partition
•
The stand can be installed if the gap between
the table and the partition is more than 15
mm.
― Tidy up the cables by running them in the
stand groove on the rear of the product before
installing the stand on the table. It is difficult to
tidy up cables if the gap between the table and
the partition is narrow. For details on how to tidy
up cables, refer to
"Tidying Up the Connected
Cables."
15 mm ≥75 mm
≥95 mm
•
Table with a raised edge (
)
The stand can be installed if a 90 mm space is
available between the spot 15 mm away from
one end of the table and the other end or if the
distance to the raised edge is more than 95
mm.
19
Advertisement
Table of Contents
