Connecting With A Pc - Samsung SyncMaster VC240 Quick Start Manual

1-5

Connecting with a PC

The connecting parts may differ depending on the product model.
• Connect the monitor to your PC as illustrated when you intend to use the monitor as a computer display only, and do not
intend to use the video call function.
• To connect the monitor and use it as a computer display only, follow these steps:
1. POWER S/W : Turns the product on and off.
2. Connect one end of the power cord to the [POWER] port of the product and connect the other end of the power cord to the
220V or 110V wall outlet.
The monitor recognizes the input voltage and switches automatically.
3. Connect the product to a PC depending on the video output supported by the PC.
When the graphics card provides DVI (Digital) output
3-1.
Connect the [DVI IN] port of the product to the DVI port of the PC with the DVI cable.
When the graphics card provides D-Sub (Analog) output
3-2.
Connect the [RGB IN] port of the product to the [RGB IN] port of the PC with the D-Sub cable.
4. SERVICE : Dedicated to A/S
5. Connect the [AUDIO IN] port on the rear side of the monitor to the sound card of the PC.
After the product is connected to a PC, you can turn the product on and use it.
When both the DVI (<DVI>) and D-Sub (<PC>) cables are connected, you can select the input signal <PC or DVI> by
pressing the [ /SOURCE] button.
1-5
1 2 3-1
POWER S/W POWER DVI IN
3-2 4 5
RGB IN SERVICE AUDIO IN
Computer
Installing the Product