Quick Start-Up Guide; Before You Start - ABB ACQ580-31 Quick Installation Manual

Quick start-up guide

This guide describes how to start-up the drive using the First start assistant on the
Hand-Off-Auto control panel. For complete information on start-up, see ACQ580
firmware manual (3AXD50000035867 [English]).

Before you start

Ensure that the drive has been installed as described in chapter
on page
installation guide
chapter
R6...R9 Quick installation guide
Guide (3AXD50000049128).
Start-up with the First start assistant on a Hand-Off-Auto
control panel
Make sure that the installation work is complete. Make sure that cover of the drive and the
cable box, if included, are on place.
Check that the starting of the motor does not cause any danger. De-couple the
driven machine if there is a risk of damage in case of an incorrect direction of
rotation.
Hints on using the assistant control panel
The two commands at the bottom of the display
(Options and Menu in the figure on the right),
show the functions of the two softkeys
located below the display. The commands
assigned to the softkeys vary depending on the
context.
Use keys ,
and/or change values depending on the active
view.
?
Key shows a context-sensitive help page.
Language, date and time, and motor nominal values
Have the motor or pump name plate data at hand.
Power up the drive.
or in chapter
25
, and to move the cursor
1 – First start assistant guided settings:
R5 Quick installation guide
on page of the ACQ580-01 Quick Start
53
Safety
and
R1...R4 Quick
on page or in
41
19