ABB ACQ580-31 Quick Installation Manual page 20

20
The First start assistant guides you through the
first start-up.
The assistant begins automatically. Wait until the
control panel enters the view shown on the right.
Select the language you want to use by
highlighting it (if not already highlighted) and
pressing (OK).
Note: After you have selected the language, it
takes a few minutes for the control panel to wake
up.
Select Start set-up and press
Set the date and time as well as date and time
display formats.
• Go to the edit view of a selected row by
pressing .
• Scroll the view with
Go to the next view by pressing
To change a value in an edit view:
• Use and
right.
• Use and
• Press (Save) to accept the new setting,
or press
previous view without making changes.
Change the units shown on the panel if needed.
• Go to the edit view of a selected row by
pressing .
• Scroll the view with
Go to the next view by pressing
(Next).
and .
to move the cursor left and
to change the value.
(Cancel) to go back to the
and .
(Next).
(Next).