Power Management; Power Modes - Denon HEOS HomeCinema HS2 Owner's Manual

Contents

Power management

Power modes

o Quick Start Mode
HEOS device automatically enters "Quick Start Mode" to save power
in the following cases. This unit will automatically resume to full power
whenever the device is selected and playing music.
The status LED dims when the mode is switched to Quick Start Mode.
Ethernet
n
After around 20 minutes of no operation and no network access after
playing music via Ethernet.
Wi-Fi
n
After around 20 minutes of no operation and no network access after
playing music via Wi-Fi.
USB
n
After around 20 minutes of no operation and no network access after
playing music from a USB memory device.
Bluetooth
n
After the Bluetooth connection is disconnected and there is around 20
minutes of no operation and no network access after playing music via
Bluetooth.
Setup Use Troubleshooting
AUX IN
n
After around 20 minutes of no operation after AUX cable is
disconnected.
OPT IN
n
After around 20 minutes of no operation after optical device is put into
standby.
COAX IN
n
After around 20 minutes of no operation after coaxial device is put into
standby.
HDMI IN
n
Play the HDMI device, such as a Blu-ray player, connected to this unit.
Around 20 minutes after HDMI device and TV are put into standby.
HDMI OUT (ARC)
n
Connect this unit and the ARC compatible TV with HDMI cable and
play TV. Around 20 minutes after TV is put into standby.
60
Status LED Appendix