About Wireless Power Saving - Denon HEOS Owner's Manual

Contents
o About Wireless Power Saving
The Wireless Power Savings feature saves power by turning off power
to the wireless radio inside the HEOS device when the device is
connected to an Ethernet network. If you disconnect the Ethernet
cable from the HEOS device, Wireless Power Saving will automatically
turn off and the wireless radio will turn on so that the HEOS device can
be discovered over your wireless network.
NOTE
If Wireless Power Savings is ON, Wi-Fi power will be temporarily turned on when
accessing the My Devices/(My Devices)/Network screen in the HEOS app or
whenever the Connect button on the device is pressed.
Setup Use Troubleshooting
o Firmware Upgrade
1
Select "Advanced".
2
Select "FIRMWARE UPGRADE".
3
Enable or disable automatic firmware upgrades.
4
Manually check for a firmware upgrade.
5
Select Save Settings to apply the new settings or
Cancel Changes to revert to the previous settings.
46
Status LED Appendix