Operating - Westfalia 32 15 21 Instruction Manual

Hook the firm lifting hook (F) into the mounting opening (N), as shown in the
drawing.
Operation
1. Before starting work, make sure the EMERGENCY STOP switch (N) is in the
OFF position.
2. This winch is fitted with two automatic
cut-off switches. They disable the winch
when reaching the upper and lower rope
end.
3. You can extend the cable winch up to
3 windings on the steel cable drum.
Then the unit turns off automatically. Do
not unwind completely the steel rope for
security reasons.
4. In return, when winding the steel cable,
the unit stops, as soon as the switch-off
weight (E) touches the switch-off lever
(upper limit) (A).
5. Switch on the cable winch by using the
toggle switch (J) and press it to that
direction you intend to move the load.
Do not switch straight from lower to
raise, but stop the machine in between.
6. By pressing the EMERGENCY STOP
switch (K), you can immediately stop the
cable winch. In order to switch on again, turn the EMERGENCY STOP switch
counter clockwise until the switch lifts up.
Operation
9
Wall
Distance
Ground