Product Safety; Slide Placement & Positioning - Inter-fab Zoomerang Installation Manual

Thank you for purchasing the Zoomerang™ slide. You have made an investment in years of family fun. Like all
Inter-Fab products the Zoomerang™ was designed to provide the ultimate in performance and safety. As with
all recreational products (particularly those associated with water) there are some common sense rules that
apply to enjoy the Zoomerang™ in a safe manner. As the owner of this product, it is your responsibility to read
and strictly enforce the guidelines listed below.
• Do not install or use this slide unless there is unobstructed clearance of 3' on either side of the exit of the
flume, a minimum of 8' clearance in front of the flume and a minimum water depth of 3'6" of water
within the corridor defined by these measurements.
• This product must be securely fastened to a deck surface that conforms to local or commonly accepted
construction standards. Do not use if the there is movement between the slide base where it contacts the
deck or with wooden decks that are inadequately supported, have signs of rot or other indications of
deterioration.
• This product should never be used without adult supervision.
• This product has a user weight limit of 200 lbs.
• The Zoomerang™ should only be used feet first in a seated position. Never let users slide headfirst or
backward.
• Users should hold the grab rails before beginning to climb the ladder and maintain constant contact with
grab rails until seated in the proper position to begin a feet first slide.
• Never stand upright on top of or jump off of the Zoomerang™.
• Users should always check to see that the slide corridor outlined above is free of bathers, pool toys or
other obstructions prior to sliding to avoid possible collisions.
• The Zoomerang™ is to be used only by one slider at a time.
•
Check local electrical code requirements regarding acceptable methods of grounding the metal
components of the Zoomerang™.
Foreword:
Before
beginning the assembly
process of the slide, first
determine where it will be
positioned.
Scale: 1 square = 1'
S a f e t y F
S a f e t y F
3
i r s t !
i r s t !