Sending An Emergency Call; Sending A Silent Emergency Call; Menu Navigation - Motorola APX 1000 2 Quick Reference Manual

APX1000_M2QRG.book Page 4 Tuesday, August 11, 2015 7:34 PM
2
Listen for a transmission.
OR
Press and hold Volume Set button.
OR
Press Monitor button and listen for activity.
3
Adjust volume, if necessary.
4
Press the PTT button to transmit; release to
receive.
Sending an Emergency Alarm
1
Press and hold the Emergency button*.
2
The display shows Emergency and the current
zone/channel. Radio sounds a short, medium-
pitched tone, and the LED blinks red momentarily.
3
When acknowledgment is received, you hear four
beeps; alarm ends; and radio exits emergency.
4
Press and hold the Emergency button to exit
emergency.
* Default timer of Emergency button press to
activate Emergency is 50 milliseconds. This timer
is programmable, see Emergency Operation in the
user guide for details.
To exit emergency at any time, press and hold the
Emergency button.

Sending an Emergency Call

1
Press the Emergency button.
2
Press and hold the PTT button. Speak clearly into
the microphone.
3
Release the PTT button to end call.
4
Press and hold Emergency button to exit
emergency.

Sending a Silent Emergency Call

1
Press the Emergency button.
English
2
The display does not change; the LED does not
light up, and there is no tone.
3
Silent emergency continues until you:
Press and hold the Emergency button to exit
emergency state.
OR
Press and release the PTT button to exit the
Silent Emergency Alarm mode and enter regular
dispatch or Emergency Call mode.
Display Status Icons
MFK is in Mode Change feature.
MFK is in Volume Change feature.
u
Receiving a call or data.
t
Transmitting a call or data.
8
Blinks when the battery is low.
v
The more stripes, the stronger the signal
strength for the current site (trunking only).
O
Direct radio to radio communication or
connected through a repeater.
On = Direct
Off = Repeater
M
This channel is being monitored.
H .
L = Radio is set at Low power.
H = Radio is set at High power.
OR

Menu Navigation

< or > to Menu Entry.
{ | }
, , or directly below
Menu Entry to select.
H to exit.
i
Scanning a scan list.
Blinking dot = Detects activity on the
j
Priority-One Channel during
scan.
Steady dot = Detects activity on the
Priority-Two Channel during
scan.
k
The vote scan feature is enabled.
n
On = User is currently associated with the
radio.
Off = User is currently not associated with
the radio.
Blinking = Device registration or user
registration with the server failed due to an
invalid username or pin.
o
Data activity is present.
m
On = Secure operation.
Off = Clear operation.
Blinking = Receiving an encrypted voice
call.
U or D to scroll through sub-list.
{ | }
, , or directly below
Menu Entry to select.