Maintenance; Cleaning The Housing; Service Department - oventrop OV-DMC 3 Operating Instructions Manual

Maintenance

10. Maintenance

10.1 Cleaning the housing

CAUTION
Danger of electric shock if liq-
uids penetrate the power supply
f If connected, disconnect the pow-
er supply from the mains plug.
f Contact the Oventrop service
department
NOTICE
Damage to surfaces caused by
aggressive cleaning agents
f Do not use abrasive powders or
cleaning agents which dissolve
plastic when cleaning.
f If required, clean surfaces with
a soft cloth. When dealing with
more severe dirt, moisten the cloth
slightly with water or use a mild
detergent.
32

10.2 Service department

Follow the applicable transport
requirements for LiFEP04 (lithium iron
phosphate) batteries.
Local regulations may prescribe
transport in specially-secured con-
tainers or disposal on site, especially
for damaged batteries.
f Transport the measuring system in its origi-
nal packaging.
f If there is a defect, do not open the
housing. Send the product to the following
address.
f Please send the product to the following
address for manufacturer calibration on a
regular annual basis to ensure failure-free
operation:
Oventrop GmbH & Co. KG
Industriegebiet Nord
Hinterm Gallberg 5
D-59929 Brilon
"OV-DMC 3"
106927880-V02.03.2019