Data Block Output; No Tag Message - Marson MR10A7 User Manual

4-5-6. Data Block Output

Whether to output the data block of User Memory. This is only applicable when 4.2 Tag Info is set
to "Read All Data Block" or "Read NDEF".
Data Block Output：
Disable
Configuration Method: Choose one of the two.
Default setting: Disable

4-5-7. No Tag Message

Whether to output No Tag Message. No Tag Message is a preset message, such as "No Tag", that
displays when no Tag could be read upon terminating a Scan Session. It is applicable only for
Trigger Mode.
No Tag Message：
Disable
Configuration Method: Choose one of the two.
Default setting: Disable
Enable
Enable
- 35 -