Rfid Parameters Setup; Operation Mode - Marson MR10A7 User Manual

4. RFID Parameters Setup

Below are all options of RFID Parameters Setup displayed in tree view:
Figure 4-1 RFID Parameters Setup
Choose the item to configure, then double click the left mouse button or press Enter to enter
the desired parameters setting window.

4-1. Operation Mode

Figure 4-2
Detailed explanations for the two above-mentioned Operation modes are as follow:
(1) Trigger Mode Operation Method:
<A> Press the Trigger button to start a Tag Scan Session. Upon successful Tag Scan (Good Read)
the Scan Session will stop.
To configure the Operation Mode for either Trigger Mode or Auto
Mode, choose one of the two.
Configuration Method:
Check one of the two options, then click
setting to the MR10A7.
Default setting: Trigger Mode
- 29 -
to send the new