Tag Info - Marson MR10A7 User Manual

<B> If the Trigger button is pressed but no successful Tag scan occurred within the Session Time,
the Scan Session will terminate. In any case, releasing the Trigger button will terminate the
Scan Session.
<C> In Sleep Mode, pressing the Trigger button will automatically reactivate Trigger Mode. For
Sleep Mode settings, please refer to 4-8. Enter Sleep Mode / Timer.
(2) Auto Mode Operation Method:
<A> The Auto Mode follows the same rules of operation as the Trigger Mode, except Tag Scan
Sessions start automatically, without pressing the Trigger button.
<B> Scan Sessions do not terminate unless the unit enters Sleep Mode.
<C> Pressing the Trigger button while in Sleep Mode will automatically reactivate Auto Mode.
CAUTION ! Auto Mode is more power-consuming.

4-2. Tag Info

Figure 4-3
Tag Info provides user the options of Read UID only, Read All Data
Block (reads full data on user memory) and Read NDEF (only reads
data that conforms to NDEF(NFC Data Exchange Format) format on
user memory).
Configuration Method:
Check one of the three options, then click
setting to the MR10A7.
Default setting: Read UID only
- 30 -
to send the new