Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
In Stop or no
1
disc mode,
press MENU
button.
MOVE
ENTER
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote.
Press TEST TONE button.
•
Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
•
Use this function to check that each speaker is correctly
connected and that there is no problem.
To end the test tone,
press TEST TONE button again.
53
Press Cursor
2
button to move to
'Audio' and then
press ENTER button.
MOVE
EXIT
ENTER
EXIT
L: Front Speaker (L)
R: Front Speaker (R) SL: Rear Speaker (L)
Multi-Channel Pro Logic Mode
Press Cursor
3
to move to 'TEST
TONE' and then press
ENTER button.
•
The test tone will be sent to L
R
SR
SL
SW in order.
If the ENTER button is pressed again
at this time, the test tone will stop.
MOVE
ENTER
RETURN
STOP
C: Center Speaker
SW: Subwoofer
SR: Rear Speaker (R)
Start
button
C
EXIT
EXIT