Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your
speaker configuration and whether certain speakers are used or not.
Note
•
Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page
In Stop mode,
1
press MENU
button.
MOVE
ENTER
EXIT
In the Speaker
3
Setup, press the
ENTER button
EXIT
MOVE
ENTER
RETURN
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are connected.
Press Cursor
2
button to move to
'Audio' and then
press ENTER button.
MOVE
ENTER
EXIT
Press Cursor
, buttons to
4
move to the desired
speaker and then
press ENTER button.
•
For C, SL, and SR, each time the button
is pressed, the mode switches
alternately as follows: SMALL
•
For L and R, the mode is set to SMALL.
EXIT
MOVE
CHANGE
RETURN
GB
,
,
NONE.
50