Disc Playback - Samsung HT-Q20 Instruction Manual

Disc Playback

Note
•
Depending on the content of
the disc, the initial screen may
appear different.
1
Press OPEN/CLOSE button to open the
disc tray.
2
Load a disc.
•
Place a disc gently into the tray with the disc's label
facing up.
3
Close the compartment by pressing the
OPEN/CLOSE button again.
DVD VCD
•
Playback starts automatically.
To stop playback, press STOP during playback.
•
If pressed once, "PRESS PLAY" is displayed and the stop position will be
stored in memory. If PLAY/PAUSE (
pressed, playback resumes from the stop position. (This function works only
with DVDs.)
•
If pressed twice, "STOP" is displayed, and if PLAY/PAUSE (
pressed, playback starts from the beginning.
To temporarily pause playback, press PLAY/PAUSE
during playback.
•
To resume playback, press PLAY/PAUSE (
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds
while the power is turned off.
•
By default, the video format is set to "PAL".
•
"NTSC" or "PAL" will appear in the display. At this time, press the NT/PAL button
shortly to select between "NTSC" and "PAL".
•
Each country has a different video format standard.
•
For normal playback, the video format of the disc must be the same as the video
format of your TV.
CD
) button or ENTER button is
) button again.
GB
) button is
22