Operating A Tv With The Remote Control - Samsung HT-Q20 Instruction Manual

Operating a TV with the Remote Control

67
When operating a TV with the remote control
1
2
3
4
5
Note
•
The remote control may not work on some brands of TVs. Also, some operations may not
be possible depending on your brand of TV.
•
If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.
Press TV button to select TV mode.
Press POWER button to turn on the TV.
Point the remote control toward the TV.
While holding down POWER, enter the code
corresponding to your brand of TV.
•
If the code matches the TV's code, the TV will be turned off.
•
If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
Point the remote control toward the TV
and press POWER. If the TV turns off or
on, the setting is complete.
•
You can use the TV POWER, VOLUME, CHANNEL, and Numeric
buttons (0~9).