Before Using Your Home Theater; Disc Playback - Samsung HT-X250 Instruction Manual

Before Using Your Home Theater
Disc Playback
_To Operate Samsung TVandthe HomeTheater w iththe HT-×250's R emote Control
your
The DVD Home Theater's remote can be used to control Samsung TVs.
POWER .... _ _,_ _ _E_[_
@ i!i ii:i
/--%
i: F
Plug the main unit's power cord into the AC power supply.
2 Press the TV button to set the remote to TV mode.
3 Press the POWER button to turn on your Samsung TV
with this remote.
4 Press the TV/VlDEO button to select VIDEO mode on your TV.
VIDEO
6 Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
6 Press the FUNCTION button on the main unit or DVD button
on the remote to enable DVD playback.
l
i
/¸¸¸¸¸%¸ / _ / _
k
STOP PLAY
Load a disc vertically into the Disc Insert Hole.
= Inserta discso thatthe labelsidefacesforward
= Playbackstartsautomatically.
To eject the disc, press the EJECT button.
To stop playback, press the 8TOP button during playback.
= If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
If the PLAY/PAUSE ( _,HI) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, <STOP> is displayed, and if the PLAY/PAUSE ( _H ) button is pressed, playback starts from the
beginning.
;_ To temporarily pause playback, press the PLAY/PAUSE ( _nn) button during playback.
Toresumeplayback,pressthe PLAY/PAUSE ( _nn ) buttonagain.
• Depending on the content of the disc, the initial screen may appear different.
• Pirated discs will not run in this player because it violates the OSS (Oontent Scrambling System : a copy protection
system) recommendations.
24 25