Unpack - EasyThreed X5 Use Manual

Thanks for purchasing Easythreed X5 3d printer, it's a 3d machine for consumer, it can make your life creation
come true , the printer is easy operation.
Please go to www.easythreed.com for manual updates .

1.0 Unpack

1, Take out X5 from the packing box , remove foam , PE bag , tapes ( scissors may need ).
2, There is 1 X5 machine and 1 accessory box inside , ( owner manual , filament , USB cable, adaptor , TF card
all include.)
reader, TF card , scraper,filament holder, cross screwdriver and lubricant grease
3, please remove these two straps used to fix the X axis, (as above photo attention)
4, put the Filament holder, and hang on the filament(as photo 2)