Technical Data; Main Components; Special Safety Precautions - Power Craft JIG SAW 42500 Instruction Manual

INSTRUCTION MANUAL
Introduction
To get the most out of your new jig saw, please
read through these instructions and the attached
safety instructions before use. Please also save the
instructions in case you need to refer to them at
a later date.

Technical data

Voltage:
Power rating:
Motor speed (free-running):
Max. depth/item thickness:

Main components

1. Handle
2. Speed selector
3. Lock button
4. On/off button
5. Blade guard
ENGLISH
6. Blade holder
7. Saw blade
8. Adjustment screws for parallel guide
9. Parallel guide
10. Soleplate
11. Pendulum regulation knob
12. Dust exhaust
13. Ventilation slots
230 V ~ 50 Hz
14. Allen key
710 W
0 -3000 RPM

Special safety precautions

80 mm
Do not use for cutting pipes or cables.
Do not use cracked, blunt or damaged blades.
Do not start the saw if no blade is fitted.
Check there are no obstructions in/on the surface
under the item to be cut.
Do not attempt to cut items thicker than the
maximum cutting depth of the blade, or where
there is insufficient space for the blade under the
item.
19