Connecting External Components - Samsung HT-410HD Instruction Manual

1p~40p(410HD)-GB 7/27/04 4:58 PM

Connecting External Components

Connecting an External Digital Component
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Optical Cable
(not supplied)
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
2
Press AUX on the remote control to select 'DIGITAL IN'.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD DIGITAL IN
17
Page 20
DIGITAL OUT
AUX 1 AUX 2.
AUX1 AUX2 FM AM.
Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
Audio Cable
(not supplied)
If the external analog component
has only one Audio Out, connect
either left or right.
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX on the remote control to select AUX 1 or AUX 2.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD DIGITAL IN
AUX 1 AUX 2.
AUX1 AUX2 FM AM.
18