Hob - Care And Cleaning; Oven - Daily Use - Zanussi ZCG51011WA User Manual

Table of Contents

Advertisement

Available languages

Available languages

CAUTION!
Make sure that the pots are placed
centrally on the burners in order to
get maximum stability and to get
lower gas consumption.
Energy saving
• If it is possible, always put the lids on the
cookware.
• When the liquid starts to boil, turn down the
flame to barely simmer the liquid.
Diameters of cookware
WARNING!
Use cookware with diameters
applicable to the size of burners.

Hob - Care and cleaning

WARNING!
Refer to Safety chapters.
General information
• Clean the hob after each use.
• Always use cookware with clean bottom.
• Scratches or dark stains on the surface have
no effect on how the hob operates.
• Use a special cleaner applicable for the
surface of the hob.
• Wash stainless steel parts with water, and
then dry them with a soft cloth.
Cleaning of the hob
• Remove immediately: melted plastic,
plastic foil, and food with sugar. If not, the
dirt can cause damage to the hob.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat stains,
shiny metallic discoloration. Clean the hob
with a moist cloth and some detergent. After
cleaning, rub the hob dry with a soft cloth.
• To clean the enamelled parts, cap and
crown, wash them with warm soapy water
and dry them carefully before you put them
back.

Oven - Daily use

WARNING!
Refer to Safety chapters.
8
Burner
Rapid
Semi - rapid
Auxiliary
Pan supports
The pan supports are not resistant
to washing in a dishwasher. They
must be washed by hand.
1. Remove the pan supports to easily clean
the hob.
Be very careful when you replace
the pan supports to prevent the hob
top from damage.
2. The enamel coating occasionally can have
rough edges, so be careful when you wash
the pan supports by hand and dry them. If
necessary, remove stubborn stains with a
paste cleaner.
3. After you clean the pan supports, make sure
that they are in correct positions.
4. Make sure that the arms of the pan
supports are in the centre of the burner for
the burner to operate correctly.
Periodic maintenance
Speak to your local Authorised Service Centre
periodically to check the conditions of the gas
supply pipe and the pressure adjuster, if fitted.
Diameter of cook-
ware (mm)
160 - 220
140 - 220
120 - 180
www.zanussi.com

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents