Hob - Care And Cleaning - Zanussi ZCV69360BA User Manual

Cookware made of enamelled steel and
with aluminium or copper bottoms can
cause a colour change on the glass-
ceramic surface.
To save energy and ensure that the hob
operates properly the cookware bottom must
have a suitable minimum diameter.
7.2 Minimum cookware diameter
Cooking Cookware diam‐
zone eter (mm)
Left rear Φ 145

8. HOB - CARE AND CLEANING

WARNING!
Refer to Safety chapters.
8.1 General information
• Clean the hob after each use.
• Always use cookware with a clean base.
• Scratches or dark stains on the surface
have no effect on how the hob operates.
• Use a special cleaning agent suitable for
the surface of the hob.
• Always use a scraper recommended for
hobs with a glass surface. Use the scraper
only as an additional tool for cleaning the
glass after the standard cleaning
procedure.
WARNING!
Do not use knives or any other sharp,
metal tools to clean the glass surface.
12 ENGLISH
Cooking
zone
Right rear
Right front
Left front
7.3 Simplified cooking guide
Heat
setting
1
2
3
4
5
6
Power (W)
1200
8.2 Cleaning the hob
• Remove immediately: melted plastic,
• Remove when the hob is sufficiently
• Remove shiny metallic discoloration:
Cookware diam‐
eter (mm)
Φ 180
Φ 145
Φ 180
Application
Keeping warm
Gentle simmering
Simmering
Frying / browning
Bringing to boil
Bringing to boil / quick frying / deep-frying
plastic foil, salt, sugar and food with sugar,
otherwise, the dirt can cause damage to
the hob. Take care to avoid burns. Use a
special hob scraper on the glass surface
at an acute angle and move the blade on
the surface.
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration. Clean
the hob with a moist cloth and a non-
abrasive detergent. After cleaning, wipe
the hob dry with a soft cloth.
use a solution of water with vinegar and
clean the glass surface with a cloth.
Power (W)
1700
1200
1700