Installation Of The Dp70 Camera With The Dp2-Bsw Software; Preparing Your Computer - Olympus DP70 User Manual

Installation of the DP70 camera with
the DP2-BSW software
System requirements
See the DP70 Instructions Manual, page 4, for the system requirements.

Preparing your computer

You can also install the DP2-BSW software on your PC when you have already
installed another software package from Olympus Soft Imaging Solutions on it.
Only if the camera
has not been
installed previously
After starting the
computer this dialog box
will be opened.
Only if the camera
has not been
installed previously

Installation of the DP70 camera with the DP2-BSW software

1)
Switch on the PC and start the operating system.
You need administrator rights in order to install the software.
The Found New Hardware
detected the new PCI board.
2)
Click the Cancel button to abort the
The Found New Hardware
be installed in conjunction with the image analysis psystem.
3)
Insert the software protection key (dongle) into a USB port of your PC.
dialog box will open. The operating system has
installation.
dialog box will be closed. The correct drviers will