Color - Olympus DP70 User Manual

Camera settings
Gain
(White Balance)
By default, when you acquire images, no pseudo color tables will be used. In this
case, the Pseudo Color > Off
Select the Use high/low pseudo color table
intensity value displayed in blue, and all of those with a high intensity value displayed
in red. When you acquire this image, it will show all of the pixels in their actual color.
With this pseudo color table you can immediately see if the image is well illuminated.
When there are both blue and red pixels in the image, the camera's complete
dynamic range will be in use. If too many blue pixels can be seen, the image is under-
exposed. If too many red pixels can be seen, the image is overexposed.

Color

Use this dialog box in the
manually.
You can change the Gain
move their slide controls. R, G and B stand for the Red, Green and Blue color chan-
nels.
With the Gain (White Balance)
separately. Increase, e.g. the R value, to increase the amount of red in the image.
Normally, you should never alter the gain value manually. Instead, use the
Balance command, in the
balance will be automatically adopted in the fields of this dialog box.
The Gain (White Balance)
types "24 bit RGB Color" or "48 bit RGB Color" (see
option is selected.
option to have all of the pixels with a low
Camera Settings to change the camera's color settings
parameter for each color channel separately. To do this,
value, you can weight the individual color channels
Camera Control tool window. The results of the white
group is only available when you have selected the image
Image Type on page 18).
White