Gauge Info Tab - Vega DSGH Operating Instructions Manual

Table 4.2 Process Variables tab — display values
Value
Uniformity Gain
Source Decay Gain
Stdz Gain
HV Setting

Gauge Info tab

Table 4.3 Gauge Info tab — additional display values
Value
Sensor
Coefficients
DSGH Installation and Operation Guide
Description
Displays the current value of the uniformity gain. Use this
to force all density gauge sensors to output the same
counts at a given radiation field
The current value of the source decay gain. Use this to
compensate for the natural decay of the radiation source,
which produces a lower field over time.
The current value of the standardize gain that adjusts with
each standardize procedure.
The set point for the sensor high voltage.
Description
The algorithm that compensates for variations in measurement
output with changes in temperature uses temperature
coefficients. The factory determines the coefficients through
rigorous testing. You cannot change them through normal
operation.
Advanced functions
Scintillator sensor voltage
Firmware's version on the
FLASH
Hardware's version number
GEN2000 CPU board's
serial number
GEN2000 unit's serial
number
Sensor Coefficients
T0 – T3
59