Factory Service - PS Engineering PM1200 Operator And Installation Manual

neering SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES. This warranty does not
cover a defect that has resulted from improper or unreasona-
ble use or maintenance as determined by us. This warranty
is void if there is any attempt to dissemble this product
without factory authorization. This warranty gives you spe-
cific legal rights, and you may also have other rights which
may vary from state to state. Some states do not allow the
exclusion of limitation of incidental or consequential dam-
ages, so the above limitation or exclusions may not apply to
you.
4.2

Factory Service

The PM1200 is covered by a one-year limited warran-
ty. See warranty information.
Call PS Engineering, Inc. at (865) 988-9800 before you
return the unit. This will allow the service technician to pro-
vide any other suggestions for identifying the problem and
recommend possible solutions.
After discussing the problem with the technician and
you obtain a Return Authorization Number, ship product
to:
PS Engineering, Inc.
Attn: Service Department
9800 Martel Road
Lenoir City, TN 37772
(865) 988-9800 FAX (865) 988-6619.
PS Engineering is not responsible for units shipped US
If no method of payment is provided, the units will be re-
turned COD. If no RMA or description of problem is present, the
shipment will be refused.
PM1200 Remote P/N 11961
installation drawing (not to
scale)
200-196-0104
NOTE:
Mail.
Page 6 April 2020 Rev. 13