PS Engineering PM1200 Operator And Installation Manual
  1. Manuals
  2. Brands
  3. PS Engineering Manuals
  4. Intercom System
  5. PM1200
  6. Operator and installation manual

PS Engineering PM1200 Operator And Installation Manual

Panel mounted intercom with intellivox for high noise application
Hide thumbs Also See for PM1200:
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
PM1200
Panel Mounted Intercom with
IntelliVOX®
for High Noise Application
Part No. 11960
Includes 11961 & 11960-Exp
Operator's and Installation Manual
PS E
, I
9800 Martel Road
Lenoir City, TN 37772
Phone (865) 988-9800 FAX (865) 988-6619
www.ps-engineering.com
U. S. Patent 6,493,450
Document Number 200-196-0104
NOTICE: Warranty is not valid unless this product
is installed by an Authorized PS Engineering dealer.
Rev 13, April 2020
PS Engineering, Inc. 2020©
Copyright Notice
Any reproduction or retransmittal of this publication, or any portion thereof, without the expressed written permission of PS
Engineering, Inc. is strictly prohibited. For further information contact the Publications Manager at PS Engineering, Inc.,
9800 Martel Road, Lenoir City, TN 37772. Phone (865) 988-9800
200-196-0104
Page 1
April 2020 Rev. 13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PM1200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for PS Engineering PM1200

Summary of Contents for PS Engineering PM1200

  • Page 1 Any reproduction or retransmittal of this publication, or any portion thereof, without the expressed written permission of PS Engineering, Inc. is strictly prohibited. For further information contact the Publications Manager at PS Engineering, Inc., 9800 Martel Road, Lenoir City, TN 37772. Phone (865) 988-9800...

  • Page 2: Section 1 General Information

    Both pilot and copilot have transmit capabilities over While in IntelliVox® mode, there must be some back- the radio. The PM1200 allows only the person who presses ground noise so that the circuits that makes the automatic their radio PTT to be heard over the aircraft radio. If both...

  • Page 3: Equipment Installation Procedures

    There aligning the holes for the knobs, LED, and switch. must be at least 12 Volts DC present at the PM1200 for the power supply to work within its designed regulation. Other- wise, it will not be able to attenuate noise properly.

  • Page 4: Power Requirements

    If the PM1200 is used with an expansion unit, music ISO modes. connected to the PM1200 will be heard in the panel unit and 10. Verify that the intercom system does not adversely affect expansion unit in ALL intercom mode. Music connected to...

  • Page 5: Section 3 Operation

    NOTE: If there is a pow- ness of the intercom and music for the pilot's headset er failure to the PM1200, or if the power switch is only. It has no effect on aircraft radio volume level, turned off, the copilot will not hear the aircraft radio.

  • Page 6: Factory Service

    Factory Service The PM1200 is covered by a one-year limited warran- ty. See warranty information. Call PS Engineering, Inc. at (865) 988-9800 before you return the unit. This will allow the service technician to pro- vide any other suggestions for identifying the problem and recommend possible solutions.
  • Page 7 PM1200, With EXPANSION Wiring P/N 11960-EXP Only 200-196-0104 Page 7 April 2020 Rev. 13...
  • Page 8 PM1200, REMOTE Wiring P/N 11961 200-196-0104 Page 8 April 2020 Rev. 13...
  • Page 9 PM1200, P/N 11960 Wiring 200-196-0104 Page 9 April 2020 Rev. 13...

This manual is also suitable for:

11960

Table of Contents