Using The Tape Counter; Connecting An Scart Audio/Video Input Cable - Samsung DVD-V440 Instruction Manual

Using the Tape Counter

The tape counter:
Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
Is reset when a cassette is inserted in the DVD-VCR
Allows you to find the beginning of a sequence
easily
If the remaining time is to be calculated
correctly, you must indicate the type of cassette
being used.
1 Insert a cassette in your DVD-VCR.
2 To set the tape counter to zero at the beginning of a
sequence:
Press INFO. twice to display the counter
Press CLEAR when you want to set the tape
counter to zero.
3 When you are ready,
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at
which the counter was set to zero, press
❿ ❿
.
Some DVD-VCR information, such as the counter,
can be displayed on the television screen (unless
you have deactivated the Screen messages mode;
refer to page 18).
Press INFO. :
Once to display the current function,
programme number, recording speed, date,
time and counter
Twice to display the counter only
Three times to display the time remaining on
the cassette
Four times to clear the display
0:00:00
➛ ➛
or
ENG-27
Connecting an SCART
Audio/Video Input Cable
You can connect other audio/video equipment to your
DVD-VCR using audio/video cables if the appropriate
outputs are available on the equipment chosen.
Examples: You wish to copy a video cassette with
the help of a second VCR.
You wish to play back and/or copy
pictures taken with a camcorder .
Make sure that both the television and the DVD-
VCR are switched off before connecting the cables.
1 Connect one end of the SCART audio/video cable
into the VIDEO INPUT socket on the front of the
DVD-VCR.
2 Plug the other end of the audio/video cable into the
appropriate output connector on the other system
(VCR or camcorder).
3 Connect one end of the SCART audio cable
supplied into the AUDIO INPUT sockets on the
front of the DVD-VCR.
Take care to respect the colour coding of the
left and right channels.
4 Plug the other end of the audio cable into the
appropriate output connectors on the other system
(VCR, camcorder or Hi-Fi sound system).
AUX
AUX
3
1
3