Selecting The Rf Out Sound Mode (G-K); Setting The Dvd-Vcr Output Channel - Samsung DVD-V440 Instruction Manual

8 ,
Press the buttons to select required position.
❷
And then press OK again to swap the position.
9
On completion, press the RETURN button four
times to exit the menu.
Selecting the RF OUT Sound
Mode (G-K)
You can choose the sound mode (K or G) according to
the TV set connected to your VCR.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
the Install option.
3
Press the OK button to select this option.
Result: The Install menu is displayed.
❿
4
Press the OK or buttons, until the TV System
option is selected.
Auto Setup
Manual Setup
TV System
VCR Output CH
❿
5
Press the OK or button to select K or G.
6
On completion, press RETURN to exit the menu.
❿
.
,
buttons to select
❷
Install
K
: K
G
: CH 36
ENG-15
Setting the DVD-VCR Output
Channel
Your DVD-VCR output channel may need to be
changed if the pictures suffer from interference or if
your TV cannot find the pictures.
Also, you can change the DVD-VCR output channel to
adjust the frequency in which information is displayed
on the screen.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
the Install option.
❿
3
Press the OK or to select this option.
Result: The Install menu is displayed.
Auto Setup
Manual Setup
TV System
VCR Output CH
4 ,
Press the buttons, until the VCR Output CH
❷
option is selected.
5
Select the required output channel (CH21~CH69)
by pressing the OK or
CH21 .. CH36
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 10).
❿
.
,
buttons to select
❷
Install
CH:21
:
: K
CH:36
: CH 36
:
CH:69
❿ ➛
buttons. and buttons.
.. CH69