Using The Assemble Edit Function; Recording From Another Vcr Or Camcorder - Samsung DVD-V440 Instruction Manual

Using the Assemble Edit
Function
This function allows you to start a new recording at a
specific position on the cassette while maintaining a
very smooth scene change.
1 Insert the cassette to be edited in your DVD-VCR.
2 Press the ❿
button to start playback.
ll
3 When you reach the position from which you wish
to start the new recording, press the ❿
4 Press the F.ADV/STEP button again as often as
necessary to advance frame by frame, until the
exact recording position is located.
5 While the DVD-VCR is in still mode, hold the REC
button ( ) down for a while to activate the
Assemble Edit function.
6 Select the source from which you wish to record by
pressing:
The PROG buttons for television channels
The INPUT SEL. button for the AV1, AV2 or
AUX input sources
7 Press the ❿
button to start recording.
ll
8 When you have finished recording, press
Recording from Another
VCR or Camcorder
You can copy a cassette to your DVD-VCR from
another video source, such as another VCR or a
camcorder.
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any
form without the permission of the owners of the
corresponding copyright.
button.
ll
1 Connect the DVD-VCR, from which the cassette is
to be copied, to the appropriate SCART audio and
video input connectors on the rear of your DVD-
VCR, as indicated on page 8.
2 Insert a blank cassette in your DVD-VCR.
3 Insert the pre-recorded cassette in the other video
source (VCR or camcorder).
4 Press the INPUT SEL. button to select the
appropriate input on your DVD-VCR: LINE IN for
the SCART input.
5 Start playing back the cassette to be copied.
6 Hold REC ( ) down for a while to start recording
on your DVD-VCR.
.
7 When you have finished recording, press
both VCR and DVD-VCR.
If you wish to view the cassette being copied:
ENG-28
Your DVD-VCR must be connected as usual to
the television (see page 7~8 for further details)
on