Selecting The Colour Mode; Nicam - Samsung DVD-V440 Instruction Manual

Selecting the Colour Mode

Before recording or playing back a cassette, you can
select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on
this DVD-VCR make a setting on the colour
system according to your TV. If your TV is a
PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
the User Set option.
❿
3
Press the OK or to select this option.
Result: The User Set menu is displayed.
(DVD-V440)
(DVD-V540)
4
Press the corresponding
Colour System option is selected.
❿
5
Press the OK or button to select
Auto PAL SECAM
Auto When playing back a cassette, the system
standard is automatically selected by the
DVD-VCR.
B/W Black and White
6
On completion, press RETURN three time to exit
the menu.
❿
.
,
buttons to select
❷
Auto
PAL
SECAM
MESECAM
B/W
Auto
PAL
SECAM
MESECAM
B/W
,
buttons, until the
❷
MESECAM B/W.
ENG-16

NICAM

NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language). NICAM programmes are always
accompanied by a standard mono sound broadcast and
you can select the desired sound.
Please refer to page 24.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
the User Set option.
❿
3
Press the OK or to select this option.
Result: The User Set menu is displayed.
(DVD-V440)
Colour System
NICAM
IPC
(DVD-V540)
4
Press the corresponding
NICAM option is selected.
5
To... Press OK or
Mono mode Off is displayed.
Off: Only set at this position to
record the standard mono
sound during a NICAM
broadcast if the stereo
sound is distorted due to
inferior reception conditions.
NICAM mode On is displayed.
On: Normally set at this
position.
6
On completion, press RETURN three times to exit
the menu.
❿
.
,
buttons to select
❷
User Set
: Auto
On
: On
Off
: On
On
Off
,
buttons, until the
❷
❿
, until...