Using The Timer Programming Feature - Samsung CHT-500 Instruction Manual

VCR
GB
Standard
ShowView
16
34
Downloaded From TheatreSystem-Manual.com Manuals

Using the Timer Programming Feature

The Timer Programming feature allows you to preset the DVD-
Timer Method
VCR to record a programme up to one month before that
programme is to be broadcast. Up to six programmes can be
preset.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Before presetting a recording, check that the date and
time are correct.
Insert the cassette and press TIMER on the remote control.
Result: The Timer Method is displayed.
Press the OK or ❿ button to select
Result: The TIMER PROGRAMMING
Press ❿!!to select the input source.
Select the required station or input source (AV1, AV2 or AUX )
by pressing the , buttons.
# ❷
Press ❿ to select the recording day.
Select the required day by pressing the
Press ❿ to select the recording start time.
Select the required hour value by pressing the
Press ❿ to select the minutes.
Select the required minute value by pressing the
buttons.
Press ❿ to select the recording stop time.
Select the required recording stop time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
Press ❿ to select the recording speed.
Press the or buttons to select the
# ❷
(Long Play), (Auto Tape Speed Select) recording speeds.
Auto
When you have finished, press the RETURN button.
Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares
the timer duration with the remaining time on the
cassette.
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the
timer recording to the actual recording time remaining
on the tape loaded. If there is insufficient tape to
complete a timer recording in AUTO mode, the DVD-
VCR automatically switches to LP mode to record the
whole programme.
option.
Standard
menu is displayed.
or buttons.
# ❷
or buttons.
# ❷
or
# ❷
or
# ❷
SP (Standard Play), LP