recording
•
Refer to pages 76~77 if you want to
- Check whether the timer Recording has set correctly or not.
- Cancel a preset recording.
M
The numbers next to each TV programme listing in the magazines or newspapers are Video Plus+ code numbers,
which allow you to programme your HDD & DVD Recorder. instantly with the remote control. Enter the Video Plus+
code for the programme you wish to record.
Video Plus+ is a trademark of Gemstar Development Corporation. The Video Plus+ system is manufactured under
licence from Gemstar Development Corporation.
VIDEO PLUS+ EXTENDED
To prevent delays or overruns, the HDD & DVD Recorder has a function called Video Plus+ Extended allowing you
to extend the recording time by up to 60 minutes.
•
Only use if PDC is not available or set to OFF.
1.
With the unit in Stop mode, press the TIMER button.
Press the ▲▼ buttons to select Video Plus+ Extended, then
2.
press the OK or ► button.
Press the ▲▼ buttons to select the Video Plus+ Extended time,
3.
then the press OK or ► button.
4.
Press the EXIT (
GO TO RECORDED LIST
You can confi rm the performance results of title lists that have passed the reserved recording time.
N
Using the TIMER button
1.
With the unit in Stop mode, press the TIMER button.
Press the ▲▼ button to select Recorded List, then press the OK
2.
or ► button.
3.
Press the EXIT (
The Recorded List screen will disappear.
80_ recording
) button to exit the menu.
) button after fi nishing the operation.
HDD & DVD RECORDER
HDD
Library
Video Plus+
Scheduled List
Guide
Off
Video Plus+ Extended : Off
10
Channel
20
Recorded List
Timer Record
30
40
Disc Manager
50
Setup
60
m MOVE
sSELECT
rRETURN
SXCVKL
HDD
No.
To
Source
Date
Start
End
01
HDD
PR 01 JAN 01 17:30 18:30
02
HDD
PR 01 JAN 01 21:00 22:00
03
HDD
PR 01 JAN 01 23:15 23:45
Delete
Delete All
Scheduled List
> MOVE
sSELECT
rRETURN
Timer Record
►
►
►
►
eEXIT
Recorded List
Mode
PDC
Status
SP
On
OK
SP
On
OK
SP
On
OK
eEXIT