Samsung DVD-SH871M User Manual page 20

connecting & setting up
CONNECTING THE HDD & DVD RECORDER
This section involves various methods of connecting the HDD & DVD Recorder to other external components and
required initial setting modes.
You can connect your HDD & DVD Recorder to the television using the SCART cable if the appropriate input
is available on the television.
1. Connect the RF cable as shown.
2. Connect one end of the SCART cable to the AV1 socket on the rear of the HDD & DVD Recorder.
3. Plug the other end into the appropriate connector on the television.
4. Plug in the HDD & DVD Recorder and TV
5. Turn on the HDD & DVD Recorder and TV.
6. Press the INPUT SEL. button on your TV remote control until the Video signal from the HDD & DVD
Recorder appears on the TV screen.
M 
The RF cable connection of this product sends only TV signals. You must connect a SCART cable or Audio/Video
cables to watch output from your HDD & DVD Recorder.
20_ connecting & setting up
To RF IN
To TV
RF Cable
To ANT INPUT