Samsung DVD-SH871M User Manual page 77


M
DVB-T Timer recording is possible only on FR mode.

On DVB-T recording, recording mode will be automatically determined depending on the quality of the video
(or audio).

If you select the number of scheduled list which has been set the series recording, 'series recording on' will be
displayed above the button display.
•
PDC : PDC (Programme Delivery Control) function.
- If you set this function on, you can control the starting and ending time of recording by special
signal included in the broadcasting signal. If a TV programme is shortened or starts earlier or later
than scheduled, this function synchronizes the starting and ending time of recording with the actual
broadcasting time automatically.
- Set up the start-time EXACTLY according to the published TV schedule. Otherwise the timer
recording will not operate.
- Do not select PDC unless you are sure the programme you wish to record is broadcast with PDC.
•
TITLE : To label the title name, press the RED(A) button.
Title renaming screen appears.
Follow steps 4 and 5 of "Renaming (Labeling) a Title" on pages 82~83.
5. After selecting the set up value for each mode, press the OK button to select Save.
•
will appear on the front panel. It means that a timer recording is registered.
If the timer settings overlap;
The programmes are recorded in order of priority. After recording of the fi rst programme is complete, the
second programme starts being recorded.
To exit without saving the current setting
Press the EXIT ( ) button.
To return to the previous menu
Press the RETURN button if you don't want to set a timer recording.
6. Turn the power off to fi nish the Timer Recording setting.
Timer Recording will not work when the power is on.
M 
The timer recording time may differ from the set time depending on disc status and overall timer recording status
(for example, recording times overlapping, or when the previous recording ends within 2 minutes before the start
time of the next recording.)

You can set up to 12 Timer Recordings.

If HDD disk has no available recording space,

If you have set the Timer Recording using PDC, the fan can still operate and make a noise when the power is off.
blinks. It means that HDD disk has no space to record.
English _77