Important Safeguards; Fitting/Removing Attachments - Russell Hobbs 20221 Instructions Manual

Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved. Children must
not use or play with the appliance. Keep the appliance and cable out of
reach of children.
c To avoid injury, take care handling the blades, emptying the bowl, and
cleaning.
h Don't add hot liquid (over 40°C) to the bowl, as it may be ejected due to
sudden steaming.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don't leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its service
agent, or someone similarly qualified, to avoid hazard.
Don't immerse the motor unit in liquid.
L
• Don't use the wand in hot oil – even moderately hot oil can cause a nasty burn.
• Don't try to chip ice, don't try to chop raw meat, and take great care with the blades.
• Don't fit an attachment or accessory other than those we supply.
• Don't use the appliance for any purpose other than those described in these instructions.
• Don't operate the appliance if it's damaged or malfunctions.
• Don't use the wand for more than 2 minutes, the whisk for more than 5 minutes, the chopper for
more than 30 seconds, then let the motor cool for 2 minutes before using it again.
DIAGRAMS
1. Light
2. Speed control
3. Switch
4. Motor unit
5. Wand attachment
6. Blade
7. Whisk holder
8. Whisk attachment

FITTING/REMOVING ATTACHMENTS

1. Unplug the appliance before fitting or removing attachments.
2. To fit an attachment, push it on to the end of the motor unit, and turn it clockwise.
3. To remove the attachment, turn it anti-clockwise, then pull the attachment off the motor unit.
USING
1. Put the plug into the power socket.
2. Press the switch to start the motor, release it to switch off.
3. Turn the speed control to the speed you want (1 = low, 4 = high).
4. The light will change colour as the speed changes.
HOUSEHOLD USE ONLY
9. Bowl lid
10. Chopping blade
11. Bowl
12. Non-slip base
13. Mashing attachment
14. Mashing attachment blade
15. Beaker
` dishwasher safe
3