Personal Safety Requirements; Protective Equipment; Accident Prevention; Function Control - probst EASYFILL EF-H Operating Instructions Manual

Operatimg Instructions
EF-H
Pos: 3.5 / 04 Sicher heitsbe stimmunge n/01 Persönliche Sicher heitsma ßna hme n/Ü_Persönliche Sic herheitsmaßma ßna hmen @ 0\m od31_2. doc @ 6619 @ 2
1.4

Personal safety requirements

Pos: 3.6 / 04 Sicherheitsbestimmungen/ 01 Per sönliche Sic herheitsmaßnahme n/ Per sönliche Sicher heit sbe stimmunge n @ 0\m od97_2. doc @ 6633 @
●
Each operator must have read and understood the operating instructions.
●
Only qualified, authorized certificated personal is allowed to operate the device and all devices which are
connected (lifting equipment).
●
The manual guiding is only allowed for machines with handles.
Pos: 3.7 /04 Sicher heitsbe stimmungen/02 Schutzausrüstung/ Ü_Sc hutza usrüstung @ 0\m od32_2. doc @ 6661 @
1.5

Protective equipment

Pos: 3.8 / 04 Sicherheitsbestimmungen/ 02 Schutzausr üst ung/Sc hutzausrüstung (Sta ndar d) @ 0 \mod98_2. doc @ 6647 @
<
The protective equipment must consist, according to the safety regulations of
the following parts:
Pos: 3.9 / 04 Sic herheitsbestimmungen/ 03 Unfallschutz/ Ü_Unfallschutz @ 0 \mod33_2.doc @ 6689 @
1.6

Accident prevention

Pos: 3.10 / 04 Sic herheitsbestimmunge n/ 03 Unfallschutz/Unfallsc hutz/Allgemein @ 0\mod99_2. doc @ 6703 @
●
The workplace has to be covered for unauthorized persons, especially children.
●
Take care in case of thunderstorm!
●
The workplace has to be sufficiently illuminated.
●
Take care with handling wet, dirty and not solidified components.
●
The working with the device in case of atmospheric editions under 3° C (37,5° F) is forbidden!
Because the goods could be fall down caused by dampness or freezing.
Pos: 3.11 /04 Sicher heitsbe stimmungen/04 Funkti ons- und Sichtpr üfung/ Ü_F unkti ons- und Sicht pr üfung @ 0\mod100_2.doc @ 6717 @
1.7

Function Control

Pos: 3.12 /04 Sicher heitsbe stimmungen/ 04 F unkti ons-und Sichtpr üfung/F unkti ons- und Sic htpr üfung (ME CHA NIK) @ 0\mod34_2.doc @ 6773 @ 3
1.7.1

General

●
Before using the device check the functions and the working condition.
●
Maintenance and lubrication are only permitted when device is shut down!
●
Do not use the device, until all faults which can cause safety hazards are removed.
●
If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using it.
●
The operating instructions must be available at the workplace every time.
●
Do not remove the data-plates of the machine.
●
Unrecognisable information signs must be replaced.
Pos: 4 /= ===== ===== ===== ===== ===== ===== @ 0\m od8_2. doc @ 515 9 @
5 / 19
Safety
V6
●
Protective clothing
●
Safety gloves
●
Safety shoes
GB