probst EASYFILL EF-H Operating Instructions Manual page 11

Operatimg Instructions
EF-H
●
By turning the handle on the spindle (1), the brushes should
be lowered down, so they barely are touching the surface of
the pavement.
●
Then lock the spindle (1) in the lock (4) in order to avoid that
the spindles are turning themselves and the brushes are
lowered down too much (high wear on brushes)!
●
If the sand should be flushed in with water, connect a water
hose to the water tap (5) and dose the water by opening and
closing the water tap.
●
When work is stopped, the water can be stopped by closing
the water tap (5)
●
The desired speed of the rotating brushes and also the
forward drive can be adjusted by the throttle (see ).
= maximum: 3200 min
= minimum: 1500 min
10 / 19
-1
-1
Operation
V6
GB