Full motion wall mount for flat panel tvs (for up to 63" tvs, fits vesa 75/100/200/300/400) (12 pages)
Summary of Contents for Commercial Electric XD2476
Page 1
THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this wall mount. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home...
Pre-Installation ENSURING THIS IS THE CORRECT WALL MOUNT FOR YOU IMPORTANT: Review this section carefully before you proceed with this installation to ensure that this is the correct TV Wall Mount for you. This TV Wall Mount is the correct wall mount for you if: □...
Page 4
Pre-Installation ENSURING WALL STABILITY Carefully inspect the wall area you have selected. Examine the wall surface before you begin drilling. WARNING: Do not drill near electrical wiring and water pipes. CAUTION: Wood studs must be no smaller than 2 x 4 in. in size. Ensure the surface covering does not exceed 5/8 in. CAUTION: Concrete walls must have a minimum thickness of 5.5 in.
Page 5
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. NOTE: The hardware included is suitable for mounting to walls made of brick, solid concrete, or wood studs covered with drywall. If your mounting situation is different, please consult a qualified installer or contact customer service at 1-877-527-0313 or visit www.HomeDepot.com.
Installation Identifying the bolt diameter to use Identifying the bolt length to use □ Insert a straw or toothpick into one of the mounting holes To ensure proper mounting of the brackets to your TV, this mounting system includes several sizes of bolts (CC - JJ), washers on the back of your TV.
Page 7
Installation (continued) Drilling mounting holes in concrete/ Drilling mounting holes in wood studs brick wall CAUTION: Avoid drilling near electrical wiring and water If you are installing the mounting system into wood studs, proceed pipes. The mounting system must be attached to a weight to step 5.
Page 8
Installation (continued) Attaching the brackets to the TV CC/DD/EE/FF OO/PP NOTE: long, or there is interference between the TV bracket and cable inlets, we strongly recommend the use of spacers. □ If necessary, align spacers (KK, LL, MM or NN) over the mounting holes on the back of your TV.
Page 9
Installation (continued) Adjusting the angle of the TV ±45˚ □ Adjust the angle of the TV by loosening the handle (1) on the wall plate assembly (A). Refer to the figure for the various angle adjustments. Securely tighten the handle (1) when you are finished.
Page 10
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM For additional support, call the manufacturer at 1-800-747-6558. Retain this manual for future use.