Self Diagnosis Function - Sony A1E Series Service Manual

Gn3tr chassis
Hide thumbs Also See for A1E Series:
Table of Contents

Advertisement

SELF DIAGNOSIS FUNCTION

The units in this manual contain a self-diagnostic function. If an error occurs, the Smart Core Red LED will automatically begin to flash.
The number of times the LED flashes translates to a probable source of the problem.
A definition of the Smart Core Red LED flash indicators is listed in the instruction manual for the user's knowledge and reference.
If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these
problems occur.
DIAGNOSTIC TEST INDICATORS
When an error occurs, the Smart Core Red LED will flash a set number of times to indicate the possible cause of the problem.
If there is more than one error, the LED will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen.
If the screen displays a "0", no error has occurred .
RED LED blinking count
2x
3x
4x
5x
6x
7x
8x
The following items will be recorded and displayed on screen although they do not carry out the RED LED blinking count.
Record Only Item
TU_DEMOD
TCON_ERR
FRCTC_I2C
AUD_ERR_I2C
4KPQ_ERR_I2C
Blue
italic: detect at startup sequence only.
XBR-55/65/77A1E
<B/G> Main 12V over voltage [MAIN_POWER]
<B> Main 5.0V failure [DC_ALERT]
<B/S> Audio amp. protection [AUD_ERR]
<T><D> TCON internal error [(All PKG)LD_ERR]
TCON I2C communication error [(PKG1.6.0.08.28.1.00.0005 or less)BCM_ERR/(PKG1.6.0.08.29.1.00.0005 or later)LD_ERR]
<P/T/G/B>
Panel ID EEPROM I2C No ACK (Also panel power failure is a suspect) [P_ID_ERR]/
<T/D> Data corruption in EEPROM[P_ID_ERR]
<G/P/B/D> G board error[BACKLIGHT]
Over temperature protection [TEMP_ERR]
<B> Temp. sensor I2C No ACK [TEMP_ERR]
<D> 4KBE Error (4KBE WDT)
<B/Tu> Tuner & Demodulator I2C communication failure
Tuner board set detect signal monitoring
None
*KA is shutdown by I2c communication failure
None
<B/D> Audio amp I2C communication failure
None
<G>: Power supply board, <B>: Main board, <D>: 4kBE board, <Tu>: Tuner board,
<P>: Panel module, <T>: T-con board, <S>: Speaker
Detection Items
Detection Items
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xbr-55a1eXbr-65a1eXbr-77a1e

Table of Contents