Sony A1E Series Service Manual page 18

WB DATA TRANSFER (XBR-77A1E)
1. In "Panel/PQ" service mode.
a. Go to "WB/Mura/CUC data transfer" category by "↑" or "↓" button.
Service Mode
Model Information
Self diagnosis History
Video / Audio
Panel / PQ
General Setting
Tuner
Wi-Fi / BT
SDB Service Menu
b. To select "WB/Mura/CUC data transfer", press "→" button.
c. To change data, press "←" or "→" button on remote.
Panel / PQ
Back
WB Adjustment
WB/Mura/CUC data transfer
XBR-55/65/77A1E
>>
>>
>>
>>
>>
>>
>>
>>
[</>] Set [Home]Exit
<<
>>
>>
[</>] Set [Home]Exit
2. In "WB/Mura/CUC data transfer".
a. Select "CUC data transfer" by pressing "↑" or "↓" button on remote.
b. To change the items, press "←" or "→" button on remote and press "Enter" button.
Choose: 1. T-con to SoC
and press "Enter" button.
c. "Mura data transfer" is also displayed on the menu, but Mura function do not work on
KA model. Please skip this item by pressing "↓" button on remote.
d. Select "[start]" and press "Enter" button to start transfer.
Back
WB / Gamma data transfer <[ 0.Soc to T-con ]>
Mura data transfer <[ 0.Soc to T-con ]>
CUC data transfer <[ 0.Soc to T-con ]>
* Disuse in KA model
Start
* Only KA77 uses
*Please refer to another manual "Service Procedure for Panel, Board and Software Change /
Upgrade(P/N:98881800x)" for details. GN3TR chassis is the same as GN1T chassis basically.
ADJUSTMENT
<<
"CUC data transfer".
[</>] Set [Home]Exit
B-board T-con
replace replace
WB/ 1.T-con to 0.SoC to
Gamma Soc T-con
1.T-con to 0.SoC to
Mura
Disuse
Soc T-con
1.T-con to 0.SoC to
CUC
Soc T-con
Panel
replace
0.SoC to
T-con
1.T-con
to Soc
1.T-con
to Soc
18