Sony XR-55A95K Service Manual

Sony XR-55A95K Service Manual

Hide thumbs Also See for XR-55A95K:

Advertisement

2023/12/21 05:31:02 (GMT+09:00)
SERVICE MANUAL (TROUBLESHOOTING)
ORIGINAL MANUAL ISSUE DATE: 2023.12
DISCLAIMER:
USE AT OWN RISK. SONY AND ITS AFFILIATES ARE NOT LIABLE FOR ANY DAMAGE
OR INJURY CAUSED TO ANY DIGITAL ELECTRONIC EQUIPMENT, PERSON, OR PROPERTY, WHICH
OCCURS DUE TO USE OF THE TOOLS, PARTS, DOCUMENTATION, OR OTHER MATERIALS HEREIN
PROVIDED, WHETHER FOR REPAIR, DIAGNOSIS, MAINTENANCE, MODIFICATION, OR OTHERWISE,
INCLUDING BUT NOT LIMITED TO: ANY INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL
DAMAGES; ANY LOSS OF DATA, PRIVACY OR PROFITS; OR ANY INABILITY TO USE, OR REDUCED
FUNCTIONALITY OF, THE DIGITAL ELECTRONIC EQUIPMENT.
THIS MANUAL BEFORE PROCEEDING. PLEASE FOLLOW ALL STEPS IN THE ORDER IN WHICH
THEY ARE DESCRIBED. IF YOU DO NOT HAVE ALL TOOLS AND PARTS AVAILABLE TO YOU, OR ARE
NOT COMFORTABLE PERFORMING THE REPAIRS DESCRIBED HEREIN, DO NOT PROCEED.
FAILURE TO FOLLOW THESE INSTRUCTIONS, OR USE THE PROPER TOOLS AND PARTS, MAY
DAMAGE YOUR PRODUCT, LEAD TO PERSONAL INJURY OR CAUSE PROPERTY DAMAGE.
PLEASE READ ALL INSTRUCTIONS IN
9-888-902-21
Sony EMCS (Malaysia) Sdn. Bhd. HES-M
© 2023.12
OLED TV
SYS SET

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XR-55A95K and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sony XR-55A95K

  • Page 1 SERVICE MANUAL (TROUBLESHOOTING) ORIGINAL MANUAL ISSUE DATE: 2023.12 DISCLAIMER: USE AT OWN RISK. SONY AND ITS AFFILIATES ARE NOT LIABLE FOR ANY DAMAGE OR INJURY CAUSED TO ANY DIGITAL ELECTRONIC EQUIPMENT, PERSON, OR PROPERTY, WHICH 9-888-902-21 OCCURS DUE TO USE OF THE TOOLS, PARTS, DOCUMENTATION, OR OTHER MATERIALS HEREIN...
  • Page 2 2023/12/21 05:31:02 (GMT+09:00) MODEL LISTS THIS SERVICE MANUAL CONTAINS TROUBLESHOOTING INFORMATION FOR BELOW MODELS: MODEL XR-55A95K XR-65A95K SYS SET...
  • Page 3: Table Of Contents

    2023/12/21 05:31:02 (GMT+09:00) TABLE OF CONTENTS Title Page SAFETY NOTES SELF DIAGNOSIS FUNCTION TROUBLESHOOTING SOFTWARE UPDATE & RESET DIAGRAMS HANDLING GUIDE Please refer Service Manual (Disassembly) for below information: Tools and Equipments  FFC Precautions  Disassembly and Removal Caution  Wire Dressing ...
  • Page 4: Safety Notes

    Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operations are identified in this manual.
  • Page 5 2023/12/21 05:31:02 (GMT+09:00) SAFETY NOTES Refer to the panel handling chapter of each Service manual, or the "Transporting" information of 1-2. Caution for OLED Panel. the Reference Guide of each model on how to hold it. 1) Handling. When repairing the TV set, be sure you are grounded by using a wrist band. 2) OLED Screen.
  • Page 6 2023/12/21 05:31:02 (GMT+09:00) SAFETY NOTES Pixel shift. To reduce the risk of image retention: Automatically moves the image on the screen to prevent image retention. • Fill the screen by changing [Wide mode] to eliminate the black bars. Select [Wide mode] other than [Normal]. •...
  • Page 7 2023/12/21 05:31:02 (GMT+09:00) SAFETY NOTES ※Things to prepare in advance. 1) Caution for Board handling(Stress) Be sure to observe the following contents. ESD wrist-strap. ① Hold the board with both hands. ② Do not hold/push Heat-Sink. ESD cushion/sheet. Please use a bag containing the board or a special seat. ③...
  • Page 8 2023/12/21 05:31:02 (GMT+09:00) SAFETY NOTES ④ Regardless of Good board or Defective board, always put it on Do not hold Heat-Sink when dis-assembly or assembly it. ⑦ ESD cushion/sheet slowly. ⑤ Do not stack up. 2) Caution for Board handling(ESD). Be sure to observe the following contents ①...
  • Page 9 2023/12/21 05:31:02 (GMT+09:00) SAFETY NOTES ※Installation example of wrist-strap. ③ When holding board, do not hit/touch to Plastic part(s). Please connect the clip to the metal part of the chassis of the TV with the wristband grounded. Below is a grounding example of each model. ④...
  • Page 10 2023/12/21 05:31:02 (GMT+09:00) SAFETY NOTES 1-5. Safety Check-Out Stabilized power supply instrument and isolated voltage transformer: Use too much current capacity and isolated voltage transformer does not need to use After correcting the original service problem, perform the following safety checks stabilized power supply equipment. before releasing the set to the customer:- Specification of RMS voltmeter: Input resistance >...
  • Page 11 2023/12/21 05:31:02 (GMT+09:00) SAFETY NOTES 1-7. How to Find a Good Earth Ground. 1-8. Lead Free Information 1) A cold-water pipe is a guaranteed earth ground; the cover-plate retaining screw on The circuit boards used in these models have been processed using Lead Free Solder. The most AC outlet boxes is also at earth ground.
  • Page 12: Self Diagnosis Function

    2023/12/21 05:31:02 (GMT+09:00) SELF DIAGNOSIS FUNCTION The units in this manual contain a self-diagnostic function. If an error occurs, the Smart Core Red LED will automatically begin to flash. The number of times the LED flashes translates to a probable source of the problem. A definition of the Smart Core Red LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 13 2023/12/21 05:31:02 (GMT+09:00) SELF DIAGNOSIS FUNCTION Self Diagnosis Quick Reference ( Not LED blinking) – Record Only Error Item Detection Items TU_DEMOD None TCON ERR None AUD_ERR_I2C <B> Audio amp I2C communication failure TEMP_ERR_I2C <B/H> Temp sensor I2C communication failure TU_DEMOD_I2C <B> Tuner & Demodulator I2C communication failure EARC_ERR_I2C None 8KBE_COM_ERR...
  • Page 14 2023/12/21 05:31:02 (GMT+09:00) SELF DIAGNOSIS FUNCTION Retry Limitation By Remote / Power Key Smart Core Error Name Retry Permission Times Note Red LED blinking count Number of off/on action for MAIN_POWER STDWN_RTRY_LIMIT_MAINPOWR MAIN_POWER shutdown is recorded to STDWN_OFFON_CNT_MAIN_POWER. DC_ALERT (5V) STDWN_RTRY_LIMIT = 2 AUD_ERR STDWN_RTRY_LIMIT = 2 LD_ERR...
  • Page 15: Troubleshooting

    2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING Triage Chart Before you make the service call: 5. Chart Color Code 1. Confirm the symptom from the customer. : Most likely defective part  2. Select that symptom from the chart. : Secondary possible defective part  3.
  • Page 16 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 1.0 No Power No Power Check STBY 3.3V Replace C1708 Between Power Board to Power Board near CN1700 on Main Board Main board Harness Harness Main Board u-Com Failure DDCON/LDO Main Device Failure SYS SET...
  • Page 17 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 1.2 No Power U – com Failure P-on u-com control signal path summary BM5S22 Board OLED Model when Mounted on IC420 Main Board PGOOD_1 3.3V_STBY #pin6 #pin21 DDC : 0.8V_M5_CORE (IC804) TCON_24_ON P_ON_#1 DDCs : 0.9V_BE_DDC_1 (IC4802), 0.9V_BE_DDC_2 (IC4803), #pin18 BL_ON IC413...
  • Page 18 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 1.2 No Power U – com Failure BM5S22 Board OLED Model when Mounted on IC420 START Check 12.7V_MAIN Line (from Power board). Check 12V_MON Check VDD Check 12.7V_24V_AUDIO Line R462 Voltage. C442 Voltage. Check 3.3V_STBY Line (C1708, CN1700 #9pin) (only FD) (from Power board).
  • Page 19 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 1.2 No Power U – com Failure BM5S22 Board OLED Model when Mounted on IC420 Previous page Check P_ON_#2 Check X_BL_MUTE Check “X_BE_RST” (from SOC Muffin). CL417 or Change IC420 CL412 or R459 Voltage. *If X_BE_RST is >3.0, SOC BE(IC5000) problem. P-on u-com #pin17 (IC420) Is the voltage >3.0V? Otherwise, SOC Muffin 5 (IC1000) problem.
  • Page 20 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 1.2 No Power U – com Failure P-on u-com control signal path summary BM5S22 Board OLED Model when Mounted on IC401 Main Board PGOOD_1 3.3V_STBY #pin6 #pin9 DDC : 0.8V_M5_CORE (IC804) TCON_24_ON P_ON_#1 DDCs : 0.9V_BE_DDC_1 (IC4802), 0.9V_BE_DDC_2 (IC4803), #pin12 BL_ON TCON_12_ON...
  • Page 21 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 1.2 No Power U – com Failure BM5S22 Board OLED Model when Mounted on IC401 Check 12.7V_MAIN Line START (from Power board) Check 12.7V_24V_AUDIO Line (only FD) (from Power board). Check “AC_OFF_DET_OUT” Check 12V_MON (CL404 or CL5221 from IC5000) Check VDD R462 Voltage.
  • Page 22 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 1.2 No Power U – com Failure BM5S22 Board OLED Model when Mounted on IC401 Previous page Check P_ON_#2 Check BL_ON CL417 or Change IC401 CL420 or R471 Voltage. Change IC401 P-on u-com #pin13 (IC401) Is the voltage >3.0V? is >3.0V? Check P_ON_HL CL415 or...
  • Page 23 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 1.3 No Power – DDCON / LDO P_ON_#1 : P-on u-com IC401 #pin12 P_ON_#2 : P-on u-com IC401 #pin13 Board Operation IC Ref Voltage supply Output ref. Enable pin Enable source Fuse Vcc ref. C508 or C514 DC/DC IC418 or IC419 5.0V_STBY_H R557...
  • Page 24 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 1.3 No Power – DDCONs check START Check IC600 / IC610 Check VCC voltage Check VCC voltage Change D800 C801 / CL819 D800 C601 / C666 Is voltage >3V? Is diode okay? Is voltage >12V? Check 3.3V_STBY. Power board Check VCC voltage Check C801 / CL819...
  • Page 25 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 1.3 No Power – DDCONs & LDO check Please refer page 23 for Reference Number. Board Operation IC Ref Voltage supply BM5S22 DC/DC IC600 or IC610 5V_MAIN/5V_AUDIO BM5S22 DC/DC IC601 3.3V_MAIN/3.3V_AUDIO START BM5S22 DC/DC IC804 0.8V_M5_CORE BM5S22 DC/DC IC807 1.8V_M5 BM5S22...
  • Page 26 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 1.3 No Power – DDCONs & LDO check Please refer page 23 for Reference Number. Board Operation IC Ref Voltage supply BM5S22 DC/DC IC418 or IC419 5.0V_STBY_H START BM5S22 IC403 3.3V_MAIN_H BM5S22 IC806 1.8V_M5_ET_STBY Check VCC voltage BM5S22 IC809 3.3V_M5_STBY Check 3.3V_STBY (Power board)
  • Page 27 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 2.0 2x LED Blinking – Main Power Error 2x blinking Check “12.7V_MAIN” Voltage > 13.2V? Power /LD* Board BM5S22 : Pin 5~7 of CN1700 Main Board SYS SET...
  • Page 28 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING Checking Point Board PWB (A side) Detail CN1700 5,7pin 12.7V_MAIN SYS SET...
  • Page 29 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 2.1 3x LED Blinking – DC Alert 3x blinking (DC Alert) Check “5.0V_VBUS” Check “12.7V_MAIN” 4.959V<Voltage<5.285V? Voltage > 13.2V? Retry BM5S22 : C611 BM5S22 : Pin 5~7 of CN1700 Power /LD* Board Main Board Error Item Number of STBY LED Blinking Description DC_ALERT Main 5V power failure...
  • Page 30 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING Checking Point Board PWB (A side) Detail CN1700 5,7pin 12.7V_MAIN C611 5.0V_VBUS SYS SET...
  • Page 31 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 2.2 3x LED Blinking – AUD_ERR 3x blinking (AUD_ERR) Measure the Speaker Replace impedance by multi-meter Main Board Speaker Harness Main Board Less than 10Ωand More than 3Ω ? Replace Replace Power /LD* Board Power /LD* Board Speaker Speaker Error Item Number of STBY LED Blinking...
  • Page 32 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 2.3 4x LED Blinking – LD_ERR 4x blinking (LD_ERR) High (3.3V) Check “LD_ERR_DET” Voltage LCD model ? Panel BM5S22 : CL5206 Low (0V) Replace LD board Main Board LD Board Error Item Number of STBY LED Blinking Description LED driver failure/LED voltage protection LD_ERR OLED...
  • Page 33 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING Checking Point Board PWB (A side) Detail CL5206 LD_ERR_DET SYS SET...
  • Page 34 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 2.4 4x LED Blinking – BCM_ERR 4x blinking (BCM_ERR) High (3.3V) Check “BE_LD_RDY” Voltage LCD model ? Panel BM5S22 : CL5223 Low (0V) Replace LD board Main Board LD Board Error Item Number of STBY LED Blinking Description LD IC initialize or I2C communication failure BCM_ERR OLED...
  • Page 35 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING Checking Point Board PWB (A side) Detail CL5223 BE_LD_RDY SYS SET...
  • Page 36 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 2.5 5x LED Blinking – P_ID_ERR 5-times blinking Replace Replace Main Board Panel (T-con) Check Replace VDD on T-CON Board Power Board Symptom Symptom Power Board = 12V (±10%) improvement improvement Main Board Panel (T-con) Symptom Replace the Harness improve Between Power Board Harness...
  • Page 37 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 2.6 6x LED Blinking – Backlight_ERR 6x blinking Harness / Connection Symptom Check High (3.3V) Check “BL_ERR” Voltage broken Improvement harness/connection Replace Harness Power/LD* board to harness BM5S22 : CL5207 Main Board Low (0V) Harness / Connection OK Symptom Improvement Replace Power...
  • Page 38 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING Checking Point Board PWB (A side) Detail CL5207 BL_ERR SYS SET...
  • Page 39 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 2.7 7x LED Blinking – TEMP_ERR 2.8 8x LED Blinking – 4KBE_ERR 7x blinking 8x blinking Setting circumstance is, OK? Set to another Temperature, location, etc. Ventilation, etc. Replace Main Board Symptom improvement Replace Main Board Main Board Aging for a few hours Panel SYS SET...
  • Page 40 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 3.1 No Sound – Speaker No Sound Speaker Check ・[Speakers] setting is [TV Speakers]? ・Nothing is connected to Headphone terminal and Bluetooth ? This confirmation way is only for traditional speaker & exciter. ・Volume setting is not too small? In PIEZO Tweeter case, we can confirm OK or NG by listening.
  • Page 41 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 3.2 No Sound – Headphone / Audio / Optical Out No Sound No Sound Headphone out / Audio out Opt out Check [Settings] Check ・[Speakers] setting is [TV Speakers]? ・Volume setting is not too small? ・[Digital Audio Out] is [PCM] ? ・[Digital audio out volume] is [Max]? no sound Replace B-PWB...
  • Page 42 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 3.7 No Sound – Tuner 3.8 No Sound – HDMI 1/2/3/4 No Sound No Sound with normal picture Check the picture Refer to 4.5 HDMI NO PICTURE Only RF tuner input? Check sound by other TV Refer to 3.1 No Sound set which is same model Check Source equipment Is Distributor used ?
  • Page 43 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 4.0 No Picture No Picture Replace Check Smart Core Refer to the flow 1.0 the V by One FFC Got Any Normal Behavior and check the power Display? Harness (Blinking) supply problem (CN6800,CN6801) Symptom improvement Refer to self diagnosis Refer to other part: V by One FFC Power supply problem...
  • Page 44 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING Input Skip Function 4.1 Video Analog Signal Path Non-Detect Detect Input Signal (Typical) (Typical) Video (Side Mini Jack) VIDEO_DET Video 3.3V IC1000 AH9-GPIO56 AL31:CVBS0P CVBS0P AH9:GPIO56 VIDEO_DET Video IC1000 (Side Mini Jack) SYS SET...
  • Page 45 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 4.2 No Picture Condition Actions to be taken No Picture Refer to IC troubleshooting for further Muffin [IC1000] investigation Problem Video No Picture J2800 Connector Problem Change Connector Check J2800 NG (Vpp: 0V) Check if input OSD Connection, VIDEO_ is GREY OUT J2800 DET at R2841...
  • Page 46 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 4.4 No Picture at Tuner IC1000 (SoC) IF/AGC Video Analog Demod. TU300* Digital Demod. X_Demod_RST_STBY DVB-T/T2/S/S2 Audio IC3101 DTMB Digital ISDB-T Demod. ATSC 3.0 ISDB-T/S/S3 Decoder JP/ATSC 3.0/Philippines only SYS SET...
  • Page 47 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 4.4 No Picture at Tuner Notes: I2C - Parts for I2C SDA line: R3036, R3040, C3005 - Parts for I2C SCL line : R3035, R3039, C3006 RF input no picture / noisy picture Waveform confirmation point • I2C_TU_SDA line: JL3013 •...
  • Page 48 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 4.4 No Picture at Tuner *I2C: Please refer Digital Tuning BM5S22 Tuner portion(Top View) BM5S22 (Top View) C3028 R3037 LNB12V BM5S22 (Bottom View) BM5S22 Tuner portion(Bottom View) Q604 R643 Q605 JL3019: 3.3V SYS SET...
  • Page 49 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 4.4 No Picture at Tuner- FOR ANALOG TUNING at All destination Notes: - Parts for IFOUT_N line : C3011 - Parts for IFOUT_P line : C3010 Analog Tuning - Parts for IFAGC line : R3003 ,R3024, C3023 For LA only : Insert correct signal in correct ANT terminal.
  • Page 50 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 4.4 No Picture at Tuner- FOR DIGITAL TUNING 1 at For TW,CH,HK,LA,PA Notes: - Parts for IFOUT_N line : C3011 - Parts for IFOUT_P line : C3010 Digital Tuning 1 - Parts for IFAGC line : R3003 ,R3024, C3023 : Insert correct signal in correct ANT terminal.
  • Page 51 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 4.4 No Picture at Tuner- FOR DIGITAL TUNING 2 at US ATSC3.0 and Philippines Notes: I2C - Parts for I2C SDA line: R3036, R3040, C3005 Digital Tuning 2 - Parts for I2C SCL line : R3035, R3039, C3006 Waveform confirmation point For US ATSC3.0 •...
  • Page 52 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 4.4 No Picture at Tuner BM5S22 Tuner portion(Top View) BM5S22 (Top View) R3024 R3027 BM5S22 Tuner portion(Top View) C3010 C3011 R3035 IFOUT_P IFOUT_N R3036 SYS SET...
  • Page 53 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 4.4 No Picture at Tuner BM5S22 Tuner portion(Bottom View) BM5S22 (Bottom View) C3023 RB3001 BM5S22 Tuner portion(Bottom View) JL3012: TU_I2C_SCL R3109 R3116 R3040 R3039 C3117 JL3013: R3117 TU_I2C_SDA R3123 R3114 R3122 R3113 R3121 R3006 R3005 R3120 R3003 SYS SET...
  • Page 54 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 4.5 No Picture: HDMI 1/2/3/4 No Picture Check the below point ① ・Check +5V_Power line CL4024/4027/4025/4026 ・Check HPD line CL4008/4010/4012/4014 Check HDMI cable Change HDMI cable Check (tolerance ±5%) HDMI1:R4079 +5V_Power OK? HDMI2:R4080 Resistor value OK? (Spec:4.7~5.3V) HDMI3:R4081 Check other HDMI4:R4082 HDMI input...
  • Page 55 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 5.0 Key Switch Button Error - Switch module type Check harness connection between Harness connection Side key buttons error Main board and issue switch module Change switch Switch module issue module Change harness between Main board Main board to switch to switch module module harness issue harness...
  • Page 56 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 5.0 Key Switch Button Error - On board Switch type Change Main Side key buttons Main board issue board error Key mechanical parts issue Change switch mechanical block SYS SET...
  • Page 57 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 5.1 IR Remote Commander Error Check harness IR remote commander does connection between Harness connection not respond Main board and Smart issue Core Change harness between Main board to Smart Core harness Main board to Smart issue Core harness Change Smart Core Smart Core issue Change Main board...
  • Page 58 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 5.2 Light Sensor Error Check harness Setting is “ON” Backlight level does not Check UI setting and connection between Harness connection change when ambient light make sure light sensor Main board and Smart issue changed setting is “ON” Core Setting is “OFF”...
  • Page 59 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 5.3 CAS ID Unknown Check harness Backlight level does not Check UI setting and Setting is “ON” connection between Harness connection make sure light change when ambient Main board and Smart issue light changed sensor setting is “ON” Core Setting is “OFF”...
  • Page 60 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 6.0 Network Malfunction: Ethernet (wired) [Network Set-up] >[Wired Set-up] on the TV Connection Fail Connection Results Connection Results Main board Cable Connection Local Access Internet Access Check Failed Failed Failed Check Auto Wired Set-up Local router Proxy setting IP address setting DHCP server Ethernet Cable...
  • Page 61 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 6.2 Wi-Fi Bluetooth - Wireless Network malfunction (1/2) 1) Internal Wireless Network malfunction Wireless Network on the TV Error message or Is the Wi-Fi radio no scan result appear strength too weak Main Board in the network setting? or even No signal? Check with another Wi- Hardware defect suspected.
  • Page 62 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 6.2 Wi-Fi Bluetooth - Wireless Network malfunction (2/2) From previous page Check harness connection is OK between Connect properly Loose harness Wi-Fi/BT module and Main Board Change harness Check with another Wi- between Main board Change Main board Fi/BT module and Wi-Fi/BT module If Wi-Fi malfunction happens,...
  • Page 63 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 6.3 Wi-Fi Bluetooth - Bluetooth malfunction Voice Remote doesn’t work Bluetooth Mouse/Keyboard/Controller doesn’t work Bluetooth Speaker/Headphone/ doesn’t work Please refer Voice Remote manual Home > Settings > Bluetooth Mouse/Keyboard/Controller Bluetooth Settings Can turn On BT and Can find the BT Bluetooth Speaker/ Headphone operation manual devices Check harness Connection...
  • Page 64 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 6.4 Built in Mic Malfunction Built in mic doesn’t work Check Mic Turn ON Mic switch switch Change FFC Cable Check harness connection Connect properly between Main board and between Main board and Receiver Receiver board Board Change Receiver board Change Main board SYS SET...
  • Page 65 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 6.5 Camera - Magnet connector type Camera (Bundle) No image Symptom OK sound No image and OK sound Camera hardware improvement ⇒ On switch on Camera cause : switch Off No image and No sound No image and No sound Symptom Check magnet improvement...
  • Page 66 2023/12/21 05:31:02 (GMT+09:00) TROUBLESHOOTING 6.5 Camera - USB connector type Camera (Accessory) No image Symptom No image and OK sound OK sound improvement Camera hardware ⇒ On switch on Camera cause : switch Off No image and No sound No image and No sound USB file play : Symptom Try to play the...
  • Page 67: Software Update & Reset

    2023/12/21 05:31:02 (GMT+09:00) SOFTWARE UPDATE & RESET Caution: DO NOT power off while the update is in progress. USB Update 1: Download USB image and unzip file. 2: Copy zip file to USB memory root folder. 3: USB memory insert TV. 4-b:USB image is not newer soft version. 4-a:USB image is newer soft version.
  • Page 68 2023/12/21 05:31:02 (GMT+09:00) SOFTWARE UPDATE & RESET Factory Data Reset – with UI method 2. Select System/Device Preferences 3. Select ‘About’ 1. At Home Menu, go to Settings 4. In About, Select ‘Reset’ [</>] Set [Home]Exit 7. Select ‘Yes’ 6. Select ‘Delete everything’ 5.
  • Page 69 2023/12/21 05:31:02 (GMT+09:00) SOFTWARE UPDATE & RESET Factory Data Reset – force method (without UI) Press and hold the Power button. (The position of the Power button depends on the model.) AC on. Hold the Power button down for several seconds until the system starts Factory Data Reset. SYS SET...
  • Page 70: Diagrams

    2023/12/21 05:31:02 (GMT+09:00) DIAGRAM 55”/ 65” Connecting Diagram SYS SET...
  • Page 71: Handling Guide

    2023/12/21 05:31:02 (GMT+09:00) HANDLING GUIDE Panel Un-Packing PANEL TOP PANEL FRONT PANEL BOTTOM You can cut the red line and open Put ⑧ on stable flat floor Open ⑧ and tear the AL bag to take panel out. to make it easy to take ⑧ out You can tear it by hand easily once you make small cut on it ※...
  • Page 72 2023/12/21 05:31:02 (GMT+09:00) HANDLING GUIDE Moving Panel Vertical Position (OK) Under horizontal emboss : Handling positions Between Between Vertical emboss Vertical emboss SYS SET...
  • Page 73 2023/12/21 05:31:02 (GMT+09:00) HANDLING GUIDE Moving Panel Face Down Position (NG) DO NOT carry panel on face down condition like above pictures SYS SET...
  • Page 74 2023/12/21 05:31:02 (GMT+09:00) HANDLING GUIDE Handling on Vertical Position & Moving DO NOT push display by finger. DO NOT grab 4 corner DO NOT push display by finger. SYS SET...
  • Page 75 2023/12/21 05:31:02 (GMT+09:00) Sony EMCS (Malaysia) Sdn. Bhd. English 9-888-902-21 HES-M © 2023.12 SYS SET...
  • Page 76 SERVICE MANUAL (DISASSEMBLY) ORIGINAL MANUAL ISSUE DATE: 2023.12 DISCLAIMER: USE AT OWN RISK. SONY AND ITS AFFILIATES ARE NOT LIABLE FOR ANY DAMAGE OR INJURY CAUSED TO ANY DIGITAL ELECTRONIC EQUIPMENT, PERSON, OR PROPERTY, WHICH 9-888-902-U1 OCCURS DUE TO USE OF THE TOOLS, PARTS, DOCUMENTATION, OR OTHER MATERIALS HEREIN...
  • Page 77 2023/12/21 05:26:50 (GMT+09:00) MODEL LISTS Model Remote Destination XR-55A95K RMF-TX900U RMF-TX900U XR-65A95K RMF-TX900U SYS SET...
  • Page 78: Please Refer Service Manual (Disassembly) For Below Information

    2023/12/21 05:26:50 (GMT+09:00) TABLE OF CONTENTS Title Page TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 : XR-55A95K DISASSEMBLY AND REMOVAL CAUTION BOARD LOCATION WIRE DRESSING EXPLODED VIEW AND PART LIST SECTION 2 : XR-65A95K DISASSEMBLY AND REMOVAL CAUTION BOARD LOCATION WIRE DRESSING...
  • Page 79: Tools & Equipments

    2023/12/21 05:26:50 (GMT+09:00) TOOLS & EQUIPMENTS 1 LIST OF ITEMS TO PREPARE i. Screwdriver (e.g., #2 Phillips Screwdriver) ii. Multimeter iii. ESD Wrist Straps iv. Metal Washer (Flat) or Coin (for remove Rear Cover) v. Ruler (for remove Rear Cover) vi. Service Manual (Disassembly) (for remove & replace details) Thickness: approx.
  • Page 80: Ffc Precautions

    2023/12/21 05:26:50 (GMT+09:00) FFC PRECAUTIONS ※Caution: DO NOT hold / touch copper side during FFC handling. FFC Insertion Method ESSENTIAL CAUTION INFO THAT MUST BE FOLLOWED BY PRODUCTION FOR ANY FFC INSERTION METHOD STRAIGHT INSERT Connector Connector DO NOT INSERT FFC IN INSERT FFC IN SLANTING CONDITION STRAIGHT CONDITION...
  • Page 81 2023/12/21 05:26:50 (GMT+09:00) FFC PRECAUTIONS Caution for FFC with Housing Connector CAUTION FOR FFC WITH CONNECTOR INSTALLATION AT PANEL SIDE ABNORMAL HANDLING WILL CAUSE CONTACT SHIFTED & FOREIGN PARTICLES ISSUE AS PICTURE BELOW: ZIFF FFC Insertion Caution Close actuator securely to lock Do not push inwards with excessive force.
  • Page 82: Section 1: Xr-55A95K

    2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER Notes : If the table-top style is the front position, change it to the back position Front position Back position Remove the SET from the stand, flip it over, and insert it into the stand and then screw tightening.
  • Page 83 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 1. Release screw which is quantity 10 pcs, and it can be done with two conditions : Face down Upright i. Face Down ii. Upright TOOLS & EQUIPMENTS FFC PRECAUTIONS...
  • Page 84 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 2. Release Recess Hook ⑤ ④ ① ③ ② ii. Upright i. Face Down ① Insert hand into the gap and release the Rear Cover ② Release hooks from 1 to 5 ⑤...
  • Page 85 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 3. Release Right Side Hook ① Lightly press the left side of the hook ① ② Insert hand into the gap and lift the Rear Cover. ③ Release 1 hook ii.
  • Page 86 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 4. Release Left Side Hook ③ ① Insert hand into the gap and lift the Rear Cover. ② Lightly press the right side of the hook. ② ③ Release 3 hooks in order from the bottom Insert hand into the gap and lift the Rear Cover and release hook.
  • Page 87 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 5. Release Bottom Hook ① Lift the bottom of Rear Cover. ② Release Hook ①,② ① ② ii. Upright i. Face Down TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1...
  • Page 88 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 6. Release Top Hook ① Move the Rear Cover toward the top of the TV ② Release 8 hooks in the same time hook. and remove the hook on the top side ii.
  • Page 89 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 7. Hook Positioning Panel Outline Panel Outline Panel Outline Panel Outline : Position to press TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 90: Board Location

    2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-2. BOARD LOCATION RECEIVER BOARD POWER BOARD WI-FI BOARD CAMERA BOARD MAIN BOARD TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 91: Wire Dressing

    2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-3. WIRE DRESSING INFORMATION INFORMATION TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 92 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-3. WIRE DRESSING TAPE TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 93 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-3. WIRE DRESSING TAPE TAPE TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 94 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-3. WIRE DRESSING TAPE TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 95 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-3. WIRE DRESSING TAPE TAPE TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 96 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-3. WIRE DRESSING TAPE TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 97 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-3. WIRE DRESSING WIRE DRESSING WIRE DRESSING TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 98 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-3. WIRE DRESSING WIRE DRESSING WIRE DRESSING TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 99 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-3. WIRE DRESSING TAPE TAPE TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 100 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-3. WIRE DRESSING WIRE DRESSING WIRE DRESSING TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 101 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-3. WIRE DRESSING WIRE DRESSING TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 102: Exploded View And Part List

    2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-4. EXPLODED VIEW AND PART LIST • Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.  (*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when ordering these components.
  • Page 103 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-4. EXPLODED VIEW AND PART LIST • Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.  (*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when ordering these components.
  • Page 104 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-4. EXPLODED VIEW AND PART LIST SET PART LIST REF. NO PART NO. DESCRIPTION REF. NO PART NO. DESCRIPTION 4-587-424-22 SPACER(17)+C • 5-000-203-01 LABEL, CENTER SP (OCD) • 1-013-517-11 G212 - STATIC CONVERTER(TV) • 5-036-141-01 LABEL, UNDER TERMINAL (BM5S22) •...
  • Page 105 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-4. EXPLODED VIEW AND PART LIST SCREW REMARKS DESCRIPTION TORQUE 4-268-126-02 SCREW, ORNAMENTAL M6X12 1.20±0.10 N.m 4-579-926-01 SCREW M3X3.0 STEP 0.65±0.10 N.m 4-472-518-11 SCREW, +PSW M3X6 0.4±0.05 N.m 5-034-828-01 SCREW, STEP CM 0.4±0.05 N.m 2-580-592-01 SCREW, +PSW M3X8 0.4±0.05 N.m...
  • Page 106 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-4. EXPLODED VIEW AND PART LIST CONNECTOR REF. NO PART NO. DESCRIPTION REMARKS 1-014-834-11 FLEXIBLE FLAT CABLE 51P CN6800(B)-CN5(TCON)(1) 1-014-833-11 FLEXIBLE FLAT CABLE 41P CN6801(B)-CN7(TCON)(1) 1-014-818-11 FLEXIBLE FLAT CABLE 25P CN102(H)-CN1200(B)(1) 1-014-817-11 FLEXIBLE FLAT CABLE 20P...
  • Page 107 2023/12/21 05:26:50 (GMT+09:00) SECTION 1: XR-55A95K 1-4. EXPLODED VIEW AND PART LIST OTHER PARTS REMARKS PART NO. DESCRIPTION 4-535-064-61 ASSY,FALL LOCK,BELT LL • 4-595-704-11 BAG, SCREW ASSY (FRE) • Including SCREW, +PSW M5X14 ( Qty 8 ) 4-262-708-04 CLAMPER, CABLE • 5-034-588-01 COVER,STAND NECK(L DER) A •...
  • Page 108: Section 2: Xr-65A95K

    2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER Notes : If the table-top style is the front position, change it to the back position Front position Back position Remove the SET from the stand, flip it over, and insert it into the stand and then screw tightening.
  • Page 109 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 1. Release screw which is quantity 10 pcs, and it can be done with two conditions : Face down Upright ii. Upright i. Face Down TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE...
  • Page 110 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 2. Release Recess Hook ① Insert hand into the gap and release the Rear Cover ② Release hooks from 1 to 5 ⑤ ④ ① ③ ② ii. Upright i.
  • Page 111 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 3. Release Bottom Hook ① Press the corner of the recess. ② Insert hand into the gap and lift the Rear Cover. ③ Release the hook Then repeat step 1 to 3 with second screw ①...
  • Page 112 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 4. Release Side Hooks ④ ① Insert hand into the gap and lift the Rear Cover. ② Release the hooks in order from the bottom.. ③ ② ① i. Face Down ii.
  • Page 113 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 5. Release Top Hooks ① Lift the bottom of Rear Cover. ② Move the Rear Cover toward the top of the TV and remove the hook on the top side. (10 places at the same time) i.
  • Page 114 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-1. DISASSEMBLY AND REMOVAL CAUTION REAR COVER 6. Hooks Positioning Panel Outline Panel Outline Panel Outline Panel Outline : Position to press TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 115: Board Location

    2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-2. BOARD LOCATION RECEIVER BOARD POWER BOARD WI-FI BOARD CAMERA BOARD MAIN BOARD TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 116 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-3. WIRE DRESSING TAPE TAPE TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 117 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-3. WIRE DRESSING TAPE TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 118 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-3. WIRE DRESSING TAPE TAPE TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 119 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-3. WIRE DRESSING TAPE TAPE TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 120 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-3. WIRE DRESSING TAPE TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 121 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-3. WIRE DRESSING WIRE DRESSING WIRE DRESSING TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 122 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-3. WIRE DRESSING WIRE DRESSING TAPE TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 123 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-3. WIRE DRESSING TAPE WIRE DRESSING TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 124 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-3. WIRE DRESSING WIRE DRESSING WIRE DRESSING TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 125 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-3. WIRE DRESSING WIRE DRESSING TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 126 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-4. EXPLODED VIEW AND PART LIST • Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.  (*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when ordering these components.
  • Page 127 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-4. EXPLODED VIEW AND PART LIST • Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.  (*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when ordering these components.
  • Page 128 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-4. EXPLODED VIEW AND PART LIST SET PART LIST REF. NO PART NO. DESCRIPTION REF. NO PART NO. DESCRIPTION 1-013-518-11 G213 - STATIC CONVERTER(TV) • 5-000-203-01 LABEL, CENTER SP (OCD) • 5-033-429-01 SHT, INSULATION (DER 2L) A •...
  • Page 129 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-4. EXPLODED VIEW AND PART LIST SCREW REMARKS DESCRIPTION TORQUE SCREW, ORNAMENTAL M6X12 4-268-126-02 1.20±0.10 N.m SCREW M3X3.0 STEP 4-579-926-01 0.65±0.10 N.m SCREW, +PSW M3X6 4-472-518-11 0.4±0.05 N.m SCREW, STEP CM 5-034-828-01 0.4±0.05 N.m 2-580-592-01 SCREW, +PSW M3X8 0.4±0.05 N.m TOOLS &...
  • Page 130 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-4. EXPLODED VIEW AND PART LIST CONNECTOR REF. NO PART NO. DESCRIPTION REMARKS 1-014-836-11 FLEXIBLE FLAT CABLE 51P CN6800(B)-CN5(TCON)(1) 1-014-835-11 FLEXIBLE FLAT CABLE 41P CN6801(B)-CN7(TCON)(1) 1-014-823-11 FLEXIBLE FLAT CABLE 25P CN102(H)-CN1200(B)(1) 1-014-822-11 FLEXIBLE FLAT CABLE 20P CN3803(B)-BT(1) 1-014-824-11 FLEXIBLE FLAT CABLE 25P(C)
  • Page 131 2023/12/21 05:26:50 (GMT+09:00) SECTION 2: XR-65A95K 2-4. EXPLODED VIEW AND PART LIST OTHER PARTS REMARKS PART NO. DESCRIPTION 4-535-064-61 ASSY,FALL LOCK,BELT LL • 4-595-704-11 BAG, SCREW ASSY (FRE) • Including SCREW, +PSW M5X14 ( Qty 8 ) 4-262-708-04 CLAMPER, CABLE • 5-035-509-01 COVER,STAND NECK(2L DER) A •...
  • Page 132: Exploded View And Part List

    2023/12/21 05:26:50 (GMT+09:00) SMART CORE EXPLODED VIEW AND PART LIST REF. NO PART NO. DESCRIPTION 5-032-669-02 COVER,TOP(DER) HL3_WW_EV_YI_OS MOUNT A-5042-282-A 5-023-161-21 SILICON MIC(PHN) 5-032-668-02 COVER,BTM(DER) TOOLS & EQUIPMENTS FFC PRECAUTIONS SECTION 1 SECTION 2 SMART CORE APPENDIX SYS SET...
  • Page 133: Appendix

    2023/12/21 05:26:50 (GMT+09:00) APPENDIX CATCHER ( CRY) ① This page is caution in case of panel replace ② This part is too small, and it may be easy to forget reusing ③ Refer page 29 or 53 for the P/N . Common for both 55” & 65” 55inch 65inch TOOLS &...
  • Page 134 2023/12/21 05:26:50 (GMT+09:00) Sony EMCS (Malaysia) Sdn. Bhd. English 9-888-902-U1 HES-M © 2023.12 SYS SET...

This manual is also suitable for:

Xr-65a95k

Table of Contents

Save PDF